Pieter1 Posted October 1, 2019 Posted October 1, 2019 Hey guys. My dropper lever keeps moving. It stops when the clamp rests against the brake but it still has a little play. Am I putting the thing on correctly? I was thinking I’ll just cut a strip of tube and use that as a gasket. Anyone else have/had this issue.
MORNE Posted October 1, 2019 Posted October 1, 2019 i remember reading about this in a review of it a while ago when i was looking at droppers.A quick fix would probably just be two layers of gorilla tape around the bar under the clamp. I'd cut it the same width as the clamp for neatness. the Lyne dropper 1x levers (v2) are Alu- so stiff and awesome + not that expensive should you want to upgrade yours eventually. https://www.on-lynecomponents.com/collections/dropper-posts/products/1-4-all-under-bar-dropper-lever-internal-external-posts
Jackal355 Posted October 1, 2019 Posted October 1, 2019 it looks like its not set up correctly. my guess is the lever mount face must be at the back. if not, tube might be to thick,maybe try insulation tape? or see if they have some sort of mount that integrates with i spec 2 or whatever that is. but that gets costly sometimes
Jackal355 Posted October 1, 2019 Posted October 1, 2019 a quick google search confirmed my first theory you are preventing the clamp from closing enough you need a nut and the lever part must be at the back of the flat face on the clamphope you get it sorted
Pieter1 Posted October 1, 2019 Author Posted October 1, 2019 a quick google search confirmed my first theory you are preventing the clamp from closing enough you need a nut and the lever part must be at the back of the flat face on the clamphope you get it sortedJis man I thought I goolgled everything, and I could not get the info. Could you post the link please? My monkey brain is not comprehending. Thanks for the help.
thebob Posted October 1, 2019 Posted October 1, 2019 This is where the dropper lever must attach: (labled 1). The clamp must be tightened onto the bar (3) and the dropper attached at (2) with another bolt
Pieter1 Posted October 1, 2019 Author Posted October 1, 2019 This is where the dropper lever must attach: (labled 1). The clamp must be tightened onto the bar (3) and the dropper attached at (2) with another bolt Ah okay. That makes sense. I had another bolt in the pack and could not figure out what it was for... Thanks for the help guys!
Pieter1 Posted October 1, 2019 Author Posted October 1, 2019 Here we go. Much better fit. Thanks again. When I was looking at this pic from their website I thought I need a longer screw.
Eddy Gordo Posted October 1, 2019 Posted October 1, 2019 Use a piece of a tube to fit in the bracket as well. It also helps protect the bars finish.
.thumb.png.75d6381975d6e967f7f244707be5c209.png)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.