Fox 34 27.5 Talas to Float conversion 2013

[charlduplessis]

Good afternoon,

I have a FOX 34 Talas 160mm shock (CD34). I want to convert to Fox 34 FLOAT RETROFIT AIR SPRING ASSEMBLY 160MM 27.5" kit but can only find the 150mm but 160mm is available. Where can I get a kit like this?

 

https://www.jensonusa.com/Fox-34-Float-Retrofit-Air-Spring-Assem-2013-2015-26275-820-01-404-Kit?avad=124225_d1eda8219&rpi=104593&utm_medium=AVLK

[charlduplessis]

Like this but in 160mm

[BaGearA]

Charl AFAIK the talas is a separate tube that houses the airspring therefore I don't thi k your form's stanchion has the dimple needed for you to fit the standard float airspring.

 

I might be wrong but doubt it

[Eddy Gordo]

You should be able to buy a float air shaft and you will also need a replacement aircap assembly. Best is to take to stoke or robbies or similar suspension repair shops.

Edited December 21, 2020 by Eddy Gordo

[Eddy Gordo]

O, and I should ad, that you will need a specific air cap assembly to fit your csu. There are so many variants. I have a spare one for a 36. When you find out your measurements, then let me know and we can see if it is what you need, if you do not ge/find the right air ca assembly. What year model is the fork?

[droo]

That's a rare beast. I've got one, but it's a 29" — dm me on the 11th when I'm back at wiel and I'll see if I can source one.