Jump to content

FrancoisdeVille

Members
  • Posts

    341
  • Joined

  • Last visited

Public Profile

  • Province
    Western Cape
  • Location
    Welgemoed

Recent Profile Visitors

2539 profile views

FrancoisdeVille's Achievements

Champion Hubber

Champion Hubber (5/6)

  1. Find another bike shop! They are milking your wallet. Yes you can rotate chains, but just changing to a new chain when its worn, is actually cheaper. Some quick link are ment for single use only, and the ones that you can reuse, will possibly wear out because of all the changing. Get a chain checker, and a new chain when needed. And much later on a new cassette.
  2. Kudos for starting MTB and for asking for advise. Second hand bikes might be a better option. As stated above, you might need to stretch your budget a tad. Is your budget only for the bikex or helmets as well - as that is the most important? Also a second hand bike might give you the option of upgrading slowly. And please dont buy a bike from a retail store such as Makro, etc. You are new to the sport and we dont want you to learn the hard way. See if you can maybe meet someone from the this Hub in your area. Thats the best way to learn. Good luck and welcome.
  3. AFAIK the Marvel brand was non labled bikes bought from the Far East long time ago by Chris Willemse Cycles, then branded as Marvel. Now there are more items than only bikes. You wont find anything online about Marvel as Marvel only exist inside CWC and CycleLab. They are budget bikes thought. Earlier years the bikes were solid bikes. I bought one many moons ago used in extensively, repainted and rebuild it. My dad still have that bike as an "around the block" cruiser.
  4. Two things: My question is, who asked them to do this? Radially lacing should be done as in a normal 2 or 3 cross where every second spoke is threaded from different sides.
  5. So the shock position is closed in front with a removable cover, but open in the back (correct me if Im wrong). How much mud and dirt is going to get stuck there with no place to fall out of and ad to the weight of the bike?
  6. Its the building industry - people do weird ****.
  7. The problem we as trade people have is these bricks with the holes in them. Some bricks have only 3 big holes in and other a lot of small holes. That is a cavity in the place where you want to install an anchor (rawl bolt or plug or whatever). Solid bricks or concrete are the best, obviously. There are products that, when you find its a hollow brick, that you install a ceetain type of fischer plug and squirt then a thick type of epoxy into the plug so it gives a larger grip area in the cavity. But those things are expensive and really meant for guys who work with this scenario every day. So whats the best to use, a fischer plug or rawl bolt? Both have their advantage and disadvantage, but the best is to hope you don't drill into a hollow part of the brick when you don't want to.
  8. We rode and explored a lot in the Tygerberg Nature Reserve - MANY YEARS AGO, when it was still allowed. There are only jeep tracks up there that connects Plattekloof to Majik Forest, but it's all still in the reserve with big fences to keep people out - AFAIK. The closest we got was a track that went from where the Pick n Pay in Plattekloof now is, all the way on top of Plattekloof and then it went to the masts of Tygerberg. So unfortunately the Reserve is off limits for cycling. So, not to be rude, but you are going to waste your time looking for a possibility.
  9. Just got this from Adendorf. The quality is really good. The grease cannister is a bit bigger than the Parktool one.
  10. The more important factor is, is the Fox set-up perfectly for you? A better fork can feel the same or even worse than a cheaper fork if not set up correctly.
  11. So, I did a short ride yesterday. Easy trail and only 10km out and back home. Easy right? - NOT FOR ME. Have not cycled in any way for the past 12 years. Built up a new bike just before lockdown last year and only rode up and down the street. But then I hit the dirt yesterday. Yes I know I am unfit and overweight - I was expecting it to be tough and I am not scared of that. But what I did not expect was how uncomfortable and even scared I felt at some spots. Even the wooden bridges across some fences was a challenge - at first. But I saw that, even in that short ride, I got some confidence back and it will be OK. Even if it's going to take a long time. The only crap thing is, that I live on top of Jip de Jager, and no matter what direction I ride, I have a moerse hill to finish. So, if you see a fluffy guy next to Jip de Jager either riding slower than walking pace or pushing his bike, give me a hoot or an energy bar. I might not talk back as my lungs are trying to escape my chest. See you guys/girls out there. I will be easy to spot - I am the slowest one.
  12. Just a question regarding hand tools (pliers, grips, etc). Do anyone know where one can get these liqiud rubber that you dip the handles in to form a new solid grip? Some of my older tools look sad and some newer tools' grip are not good.
  13. Is this vice grip style cassette tool not going to destroy the soft aluminium cassettes?
  14. This one feels realy good. This one is not a ratchet type, so less parts to brake. And with a 1/4 Inch attachment at the rear end.
My Profile My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Settings Help Logout