The expat cyclist Posted November 7, 2011 Share So it is time to upgrade the pedals on my wifes bike. She has had problems clipping in when there is mud stuck to the bottom of her shoe or on the pedal body. I know the eggbeater is supposed to be better in this area (mud clearance)...And I see they are on special almost everywhere. So give me the bad side of this pedal...Why will my wife not like them should I buy them. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/ Share on other sites More sharing options...
Thug Posted November 7, 2011 Share I've ridden them for years on both bikes and as an added bonus, Famous Shamus who is the SA Distributor, has the best backup service. Can't go wrong with them at all. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526461 Share on other sites More sharing options...
The expat cyclist Posted November 7, 2011 Share Thug, why is the egg 1 cheaper than the egg 2 but also lighter? Is there much difference in durabillity/strength? Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526464 Share on other sites More sharing options...
koukie Posted November 7, 2011 Share For me its the best pedals ever, I have the twin ti ones, so they are light aswell. I had LOOK pedals before and I gave them away, I kept on pulling my feet out of the LOOK pedals. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526484 Share on other sites More sharing options...
rock Posted November 7, 2011 Share read all about the them here, lots of changes to the 2011 models......they're heavier co they're meant to be more durable..... http://www.bikeradar.com/news/article/2011-crankbrothers-pedals-first-look-25574/ Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526506 Share on other sites More sharing options...
Mr LOOK Posted November 7, 2011 Share For me its the best pedals ever, I have the twin ti ones, so they are light aswell. I had LOOK pedals before and I gave them away, I kept on pulling my feet out of the LOOK pedals.I'd say they weren't set up correctly. The Quartz are the pedals of choice for most of SA's top MTB Pro's. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526518 Share on other sites More sharing options...
Vivster Posted November 7, 2011 Share I'd say they weren't set up correctly. The Quartz are the pedals of choice for most of SA's top MTB Pro's. Also had a friend who had the same trouble with his Quartz. Eventually had to get a new pair.EggBeater is really the best pedal. Easy to get your foot in and out, gives no trouble and after sales service is superb. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526520 Share on other sites More sharing options...
rouxtjie Posted November 8, 2011 Share My 2c Eggbeaters are flippen light, sheds mud really well and have the bling thing going for it but they are not SPD's that you can just fit and forget without maintenance(the latest CB pedal are supposedly tougher and needs rebuilding much less...time will tell). They also have a certain amount of float that you can't adjust like with SPD's which if you come from that plaform is something you have to get used to. I personally don't mind the float, but some of my friends didn't like it. If I could choose any CB pedal, it would more than likely be the candy's and not the eggbeaters, they have a bigger platform than the eggbeaters which gives you a better feeling of transfering power but that is just me. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526570 Share on other sites More sharing options...
andretraut Posted November 8, 2011 Share If it is not an eggbeater, I will not fit it to my ride, nuff said! Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526582 Share on other sites More sharing options...
AndreZA Posted November 8, 2011 Share If your cleat is caked with mud then no pedal is better then another. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526588 Share on other sites More sharing options...
Warrior Posted November 8, 2011 Share I'd say they weren't set up correctly. The Quartz are the pedals of choice for most of SA's top MTB Pro's. Look MTB pedals are the only pedal design that i know off that clips from the front. Mechanics of rocky downhill or stairs forces your feet forward in the pedals thus pushing on the front clip resulting in the pedal opening and your front foot comes out... I tried all shims 0.5mm-3mm, cut some grip off my Specialized PRO MTB shoe soles but my feet still came out the Look Quartz on technical descents.. Don't know maybe i just cant ride a bike. Gone back to Shim XTR, never failed me in over 8 years. Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526617 Share on other sites More sharing options...
NotSoBigBen Posted November 8, 2011 Share I won a cool set of 2012 XT pedals from Bicycle Safety by confining my egg beaters back to the drawer in the kitchen where they belong Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526624 Share on other sites More sharing options...
DMD 1 Posted November 8, 2011 Share My Wife was not happy with her SPD's and went down to WEBIKE who fitting some Egg Beater 3's. She has never looked back. Ps I ride the CB Candy 3's Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526629 Share on other sites More sharing options...
The expat cyclist Posted November 8, 2011 Share What do you guys mean by "eggbeaters need rebuilding..." What do you have to rebuild? Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526632 Share on other sites More sharing options...
Wallee Posted November 8, 2011 Share The old CB pedals all had bearings on the outboard side of the pedal and bushings inboard side, which obviously wear and need to be replaced. They where also not air and watertight, which meant that dust and mud eventually got into the bearings and bushings. The new models are airtight/watertight and have a 2 or 5 year warranty depending on the model. Edited November 8, 2011 by Wallee Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526697 Share on other sites More sharing options...
The Guy in Pink Posted November 8, 2011 Share Thug, why is the egg 1 cheaper than the egg 2 but also lighter? Is there much difference in durabillity/strength?The Egg 1 has a bush bearing, the 2 has a needle roller. The bush is lighter (not much 3 or 4 grames) but wears quicker than the needle rollers Link to comment https://forum.bikehub.co.za/topic/109748-eggbeater-pedalswhat-to-know/#findComment-1526721 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now