Your Enduro ride

[Iwan Kemp]

Very nice...

 

BTW, what stem are you running on there again?

 

Spank Oozy 65mm. Sometimes a Sunline V.1 AM 50mm

[Iwan Kemp]

 

What are these running down the top tube?

 

Cable guides for the front derailleur and dropper post. I removed mine as I have no need for them.

 

Can be seen in this pic

http://www.ibiscycles.com/images/uploads/wygwam/mojo_HDR130b-Ibis7086-3-620.jpg

 

and sans cables in this pic

 

[deviate]

 

Cable guides for the front derailleur and dropper post. I removed mine as I have no need for them.

 

Can be seen in this pic

http://www.ibiscycles.com/images/uploads/wygwam/mojo_HDR130b-Ibis7086-3-620.jpg

 

and sans cables in this pic

 

 

Do you think it's possible to run a ks lev integra on a grip shift? I've been playing with the idea... And Thompson runs theirs on a gear lever

 

Also the cannondale guys run that 110-160 travel adjust on a grip shifter (at least Jerome does)

 

I wonder of it would be possible.....

[Iwan Kemp]

Do you think it's possible to run a ks lev integra on a grip shift? I've been playing with the idea... And Thompson runs theirs on a gear lever

 

Also the cannondale guys run that 110-160 travel adjust on a grip shifter (at least Jerome does)

 

I wonder of it would be possible.....

 

It,s been done, yes. Can't find the thread now, but there are some clever ideas here:

http://www.bikeradar.com/mtb/gear/article/trail-tech-clever-levers-37844/

[Brett]

 

 

You must be mal my China! You just reminded me that I took a pick with the signage in as well....

 

I would love to say that I didn’t hit the drop off because of my bruised ribs or because I was riding alone (both true tho) but unfortunately that drop off is just out of my league for now. I took photos of the drop off and proceeded down gravity via the bull runs and up to the pallet drop by the N3 and down through the old freeride trail which is more my league

 

That launch is insane. Drops almost to flat.

Was there last weekend and said no ways.

 

Has anyone successfully launched that?

[Nofearnofun]

 

 

That launch is insane. Drops almost to flat.

Was there last weekend and said no ways.

 

Has anyone successfully launched that?

 

Yip, on a trail/AM as well! MENTAL!!!

[deviate]

 

Yip, on a trail/AM as well! MENTAL!!!

 

Here's my man card.... You earned it!

 

[Nofearnofun]

 

 

Here's my man card.... You earned it!

 

 

 

Here's my man card.... You earned it!

 

 

Pity that's not me in the pic, the drop off itself is out of my comfort zone but I would still attempt a drop of that size if there was a "fool proof" (steep and not off camber) landing.

 

I stand to be corrected but I think the bike in the picture is a 150/160mm travel Lapierre.

[Skott5]

Pity that's not me in the pic, the drop off itself is out of my comfort zone but I would still attempt a drop of that size if there was a "fool proof" (steep and not off camber) landing.

 

I stand to be corrected but I think the bike in the picture is a 150/160mm travel Lapierre.

 

Yip it is. The Jockey is Jason from Good2Go, and he built that drop.

He's taken his SB66 off their as well.

[Pipsqueak]

That thing lands on a berm type thing. Doesn't fill me with happy thoughts when I look at it. Kudos to anyone who goes off that.

[Captain Fastbastard Mayhem]

It,s been done, yes. Can't find the thread now, but there are some clever ideas here:

http://www.bikeradar...r-levers-37844/

 

Just done the conversion to run my normal Lev off my LH shifter. A bit of engineering and dremeling to get the internals to work properly (need to remove the notches so that it no longer has a 2 step ratchet mechanism in there) but it's now much cleaner and more intuitive. Found I could never find the right position for the KS lever. IMO the RS one is a much better design.

[(Deon)]

Just done the conversion to run my normal Lev off my LH shifter. A bit of engineering and dremeling to get the internals to work properly (need to remove the notches so that it no longer has a 2 step ratchet mechanism in there) but it's now much cleaner and more intuitive. Found I could never find the right position for the KS lever. IMO the RS one is a much better design.

come, pictures!

[Iwan Kemp]

come, pictures!

 

Says the guy who never post pics of his yellow beast.

[deviate]

 

Just done the conversion to run my normal Lev off my LH shifter. A bit of engineering and dremeling to get the internals to work properly (need to remove the notches so that it no longer has a 2 step ratchet mechanism in there) but it's now much cleaner and more intuitive. Found I could never find the right position for the KS lever. IMO the RS one is a much better design.

 

JA. That lever design is craaaap. I still want to do a grip shift instead. Will make it so clean and minimalist.... Actually make it look old school when all you had were brakes and shifters ... No ctd levers and dropper post levers

 

 

[sakkiebomskok]

Here is my new baby.

 

Carbon nomad. 7" trvael

 

XTR All round(Cranks were resprayed matt black)

Chris King Head set

Mavic Deetraks wheels(Soon to be replaced by E Thirteen TRS+ on Red Hope hubs)

Fox 36 Talas 180mm-140mm Kashima

Fox RP 23 Boostvalve

i'm running 2.5 tyres front and back(super grippy minion and panaracer)

 

Hope you guys like it

[Brett]

Here is my new baby.

 

Carbon nomad. 7" trvael

 

XTR All round(Cranks were resprayed matt black)

Chris King Head set

Mavic Deetraks wheels(Soon to be replaced by E Thirteen TRS+ on Red Hope hubs)

Fox 36 Talas 180mm-140mm Kashima

Fox RP 23 Boostvalve

i'm running 2.5 tyres front and back(super grippy minion and panaracer)

 

Hope you guys like it

 

Lekker jy!

Smaak hom stukkend!

Lol