SRAM BB30 plastic sleeves

[Rydogg]

No comments on pressfit BBs, please, but:

 

Where can i find the 2 little spindle sleeves - the ones that fit onto the crank spindle and into the inner race of the bearings. ?

 

 

[Rydogg]

Pics

[DieselnDust]

You get those loose as a set. Your LBS can order them for you.

[Rydogg]

Haven’t found a shop that can order these, or even knows what I’m talking about...

[Kotiet]

Many bike shops wont take it out on its own. When the bearing feels worn..they chuck whole thing away. There is always sand behind this on a mtb or gravel bike. Ask them for a old set of bb bearings with these waiting for the bin...take out..clean..fit

[droo]

They only come as part of a complete BB, but as Kotie says you can strip them out of an old one. I've got a pair for you if you're anywhere near Salt River.

 

Best thing you can do for a PF30 (or anything PF) is to install a WheelsMFG thread-together BB which will allow you to replace bearings individually. But kill this unit properly first, no point binning something that works.

[Spinnekop]

You get Aluminium ones.  Think FSA makes them.
Will check if I have spare.  

 

Just moer the old bearing out.  Get a good Japanes one at your local SPARES shop (NOT....I repeat NOT at your local bike shop.......they have no idea what a real bearing is)

Good bearing are around R200-R500 depending what you can lay your hands on.

 

From there press in the cups and then press into the frame.  

Half the price of the LBS.