RJClegg Posted October 11, 2019 Share ÝAre you sure you can't fit a single chain ring on your existing cranks ? It may not be necessary to change at all. Almost certain. I don't see any bolts to remove the current chainring. Link to comment Share on other sites More sharing options...
AdamA Posted October 11, 2019 Share ÝAre you sure you can't fit a single chain ring on your existing cranks ? It may not be necessary to change at all. According to the Speck Sheet... the bike uses this crank https://bike.shimano.com/en-SG/product/component/tourney/FC-TY301.html The Chain rings are riveted on not bolt on so this would not be an option Link to comment Share on other sites More sharing options...
AdamA Posted October 11, 2019 Share In Randburg. Thanks for the links gents. Will check them out. if you want to borrow my Crank Puller for a week or two you're welcome. PM me your number. Edited October 11, 2019 by AdamA Link to comment Share on other sites More sharing options...
MORNE Posted October 11, 2019 Share yea its the same crank that came with my wife's bike. Took all that out...put these in.CWC took the square taper crank out forme for free. i'm sure if you ask any bike shop for a fav they'll do it. when i change around PF bottom brackets they usually charge me like R80 id they are super busy....otherwise also free. Edited October 11, 2019 by morneS555 Link to comment Share on other sites More sharing options...
madbradd Posted October 11, 2019 Share What size chainring you looking for? I have a square taper crank with 33T that never got used for a SS project. Link to comment Share on other sites More sharing options...
AdamA Posted October 11, 2019 Share What size chainring you looking for? I have a square taper crank with 33T that never got used for a SS project. Is that 33T a Narrow Wide? i have been looking for a 33T NW for years!! Red Bird and madbradd 2 Link to comment Share on other sites More sharing options...
AdamA Posted October 11, 2019 Share yea its the same crank that came with my wife's bike. Took all that out...put these in.CWC took the square taper crank out forme for free. i'm sure if you ask any bike shop for a fav they'll do it. when i change around PF bottom brackets they usually charge me like R80 id they are super busy....otherwise also free. I think that Group set costs the same as the Bike Link to comment Share on other sites More sharing options...
MORNE Posted October 11, 2019 Share I think that Group set costs the same as the Bike got it on special for 3.3k so not that bad. it was definitely more than half the price of the wife's bike at the time lol. But it is so much better now and she enjoys het 46T granny Edited October 11, 2019 by morneS555 AdamA 1 Link to comment Share on other sites More sharing options...
AdamA Posted October 11, 2019 Share got it on special for 3.3k so not that bad. it was definitely more than half the price of the wife's bike at the time lol. But it is so much better now and she enjoys het 46T granny Spent 3.3k on your wife's upgrade.... Is that so you can upgrade yours to Eagle ASX Rainbow at 33.9K with out feeling to guilty? https://www.buycycle.co.za/mountain-bike/components/cranks/sram-xx1-eagle-axs-dub-groupset-175mm/ BikeisLife 1 Link to comment Share on other sites More sharing options...
eddy Posted October 11, 2019 Share Almost certain. I don't see any bolts to remove the current chainring. Link to comment Share on other sites More sharing options...
MORNE Posted October 11, 2019 Share Spent 3.3k on your wife's upgrade.... Is that so you can upgrade yours to Eagle ASX Rainbow at 33.9K with out feeling to guilty? https://www.buycycle.co.za/mountain-bike/components/cranks/sram-xx1-eagle-axs-dub-groupset-175mm/ hardly...i still ride 1x10 haha Link to comment Share on other sites More sharing options...
madbradd Posted October 11, 2019 Share Is that 33T a Narrow Wide? i have been looking for a 33T NW for years!! It is.... but it has this one funny looking tooth that is narrow on one side and wide on the other. Link to comment Share on other sites More sharing options...
RJClegg Posted October 11, 2019 Share What size chainring you looking for? I have a square taper crank with 33T that never got used for a SS project. Thanks. What you want for it? I do have a 32T chainring already though. Just need cranks and I guess a new BB? Really wanted to do this SS conversion myself. Link to comment Share on other sites More sharing options...
RJClegg Posted October 11, 2019 Share According to the Speck Sheet... the bike uses this crank https://bike.shimano.com/en-SG/product/component/tourney/FC-TY301.html The Chain rings are riveted on not bolt on so this would not be an option Yeah, that's it. Link to comment Share on other sites More sharing options...
RJClegg Posted October 11, 2019 Share if you want to borrow my Crank Puller for a week or two you're welcome. PM me your number. Thanks, I will let you know if I need to take you up on that offer. Link to comment Share on other sites More sharing options...
eddy Posted October 11, 2019 Share hardly...i still ride 1x10 haha Pah ! you and your new fangled stuff. I still ride 2x10 ps. I even rode 3x9 the other day. pps. XO - it worked perfectly. MORNE 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now