2016 Powertap G3 - erratic values

[Ozzie NL]

Have had Powertap G3 since 2016 and been working like a charm till last couple of weeks when readings have gone all wonky. 

Am getting up 300W when freewheeling downhill and during uphill efforts the numbers can be anywhere between 400 and 50 W when I'm pushing a constant power.

 

Anyone had this issue / know where to go to get it sorted? 

[Patchelicious]

Have had Powertap G3 since 2016 and been working like a charm till last couple of weeks when readings have gone all wonky. 

Am getting up 300W when freewheeling downhill and during uphill efforts the numbers can be anywhere between 400 and 50 W when I'm pushing a constant power.

 

Anyone had this issue / know where to go to get it sorted? 

 

Yes. Mine did the same after a little water got in. There was some seals missing (those red ones).

They, BicyclePower Trading, changed a small circuit in the hub and it was perfect again. 

Edited July 2, 2020 by Patchelicious

[Ozzie NL]

Yes. Mine did the same after a little water got in. There was some seals missing (those red ones).

They, BicyclePower Trading, changed a small circuit in the hub and it was perfect again.

Thanks problem is that BPT is no longer the distributor as SRAM bought Powertap

[shaper]

Thanks problem is that BPT is no longer the distributor as SRAM bought Powertap

Still have them on their website, so they might still be able to assist https://www.bicyclepower.co.za/collections/wheel-based

[Ozzie NL]

Still have them on their website, so they might still be able to assist https://www.bicyclepower.co.za/collections/wheel-based

Nope, spoken to Dave and they don’t assist

[DieselnDust]

Cape Cycle Systems

 

021 761 3528