Jump to content

SunRace M9 shifter compatibility with SRAM derailleur


Recommended Posts

Posted
8 minutes ago, Wyatt Earp said:

I think they are a little crazy.

Sram uses a 1:1 actuation and Shimano a 2:1

The indexing is all over the place.

this^^

SRAM 8 speed and Shimano 8 speed MTB shifters and derailleurs are compatible.

SRAM 9speed/10speed /11speed MTB shifter and Derailleurs are NOT compatible with Shimano. We need Jtech Shifter buddies to make these work.

SRAM Eagle 12speed MTB and Shimano 12 speed Mtb are Compatible.

Easy enough I reckon without the quagmire of road groups to tar the muddy waters

 

Posted
11 minutes ago, DieselnDust said:

this^^

SRAM 8 speed and Shimano 8 speed MTB shifters and derailleurs are compatible.

SRAM 9speed/10speed /11speed MTB shifter and Derailleurs are NOT compatible with Shimano. We need Jtech Shifter buddies to make these work.

SRAM Eagle 12speed MTB and Shimano 12 speed Mtb are Compatible.

Easy enough I reckon without the quagmire of road groups to tar the muddy waters

 

You can use 11 speed SRAM shifter with 11 speed Shimano Derailleur. I have used this on an MTB for many years.

Posted
42 minutes ago, Martin PJ said:

You can use 11 speed SRAM shifter with 11 speed Shimano Derailleur. I have used this on an MTB for many years.

yes if the rear derailleur is a X-Actuation unit with pull ratio of 1:1.2 it will work with a shimano shifter and vice versa.

If the unit is Exact Actuation with pull ratio of 1:3 it will not /should not work

Posted

OP

Take my word for it, just don’t mix then.

The actuation and indexing is different.

You can make anything work with a plan, but you will never know how it could actually feel if you do the right thing.

 

I spend my days fixing internet misinformation and advice.

Posted (edited)
10 hours ago, JacBrand said:

Good day

 

Does anybody know if SunRace M9 (9 speed) shifters are compatible with a 9 speed SRAM rear derailleur (SRAM X5)?

https://sunrace.com/product/dlm903-r9/

Yes, our products are compatible with Shimano and / or Sram. Our cassettes will fit onto the HyperGlide fitting (for both Shimano and Sram drive trains) or XD (for Sram drive trains). Unfortunately, we do not have any Microspline-compatible cassettes. For derailleurs and shifters the standard is Shimano-compatible, unless it has been stated clearly that the item is Sram-compatible.

 

since the shifter you posted does not state SRAM compatible , it’s not .

Edited by DieselnDust

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout