Dean111 Posted November 1, 2023 Share I have an old bike from 2004 it is a Jekyll 800 with a fox float rl rear shock Is there any cheap shock i can replace it with i dont care if it would feel like a pogo stick. I like the frame i just need a shock to keep the wheel on the ground for road use. Something not expensive. Link to comment Share on other sites More sharing options...
KatjieStewels Posted November 1, 2023 Share In your position, I'd probably take it to the local bike shop and ask them what they have that will suit your use case. I've taken plenty of project bikes to my local shop and gotten some sound advice from the mechanics there. Heck, they might even have the right shock gathering dust in a corner somewhere. Link to comment Share on other sites More sharing options...
BaGearA Posted November 1, 2023 Share 8 x 2mm mild steel with appropriate holes at ether end. The you don't have to deal with any leaks considering you don't need a shock to begin with Hairy 1 Link to comment Share on other sites More sharing options...
BaGearA Posted November 1, 2023 Share Sorry I mean like flat bar mild steel , maybe 30mm wide and 8mm thick Old XC bike so probably 150/165mm eye to eye Hairy 1 Link to comment Share on other sites More sharing options...
Dean111 Posted November 1, 2023 Share Thank you both Not sure if i could be so cruel as to add a rigid piece in there just like that BUT if my options are bone dry i will strongly consider it thanks. @armandt i will try a few shops i am not too optimistic but thanks thats all i can do i guess. Edited November 1, 2023 by Dean111 Bicycle Yard WESTERN CAPE 1 Link to comment Share on other sites More sharing options...
Barry Posted November 1, 2023 Share 3 hours ago, BaGearA said: Sorry I mean like flat bar mild steel , maybe 30mm wide and 8mm thick Old XC bike so probably 150/165mm eye to eye If it works for Jumbo Visma on a new Cervelo then it cant be half bad. Ispeed_V, TheoG, justinafrika and 1 other 4 Link to comment Share on other sites More sharing options...
KatjieStewels Posted November 1, 2023 Share 2 hours ago, Dean111 said: Thank you both Not sure if i could be so cruel as to add a rigid piece in there just like that BUT if my options are bone dry i will strongly consider it thanks. @armandt i will try a few shops i am not too optimistic but thanks thats all i can do i guess. The shop that I use to help me with my "projects" is Kroff Cycles here in Paarl, Western Cape. lol, I've built a few franken bikes during the last few years, and they help me modify parts where needed. Your situation typically sounds like one of my projects. It's fun. Please remember to post pics when you are done. I am also genuinely interested in how your solution works out, it might give a few old dual suspension bikes new life. Link to comment Share on other sites More sharing options...
Bicycle Yard WESTERN CAPE Posted November 1, 2023 Share 4 hours ago, Dean111 said: Thank you both Not sure if i could be so cruel as to add a rigid piece in there just like that BUT if my options are bone dry i will strongly consider it thanks. @armandt i will try a few shops i am not too optimistic but thanks thats all i can do i guess. Do you have shox dimensions? Link to comment Share on other sites More sharing options...
droo Posted November 2, 2023 Share 19 hours ago, Dean111 said: I have an old bike from 2004 it is a Jekyll 800 with a fox float rl rear shock Is there any cheap shock i can replace it with i dont care if it would feel like a pogo stick. I like the frame i just need a shock to keep the wheel on the ground for road use. Something not expensive. What's wrong with the current shock? Link to comment Share on other sites More sharing options...
Dean111 Posted November 2, 2023 Share 15 hours ago, Bicycle Yard WESTERN CAPE said: Do you have shox dimensions? Measuring from the outside with a ruler seems to be 130mm eyelit to eyelit Can width 43mm. Do you perhaps have an idea ? Alternate shock ? Custom ? Edited November 2, 2023 by Dean111 Bicycle Yard WESTERN CAPE 1 Link to comment Share on other sites More sharing options...
Dean111 Posted November 2, 2023 Share On 11/2/2023 at 10:08 AM, droo said: What's wrong with the current shock? Well..perhaps you can tell ? Heres the link i made this is what it sounds like. Video deleted Does it sound right ? The shock works, it feels.nice soaking up the bumps. It has a light film of oil on the shaft after each ride ( i clean it before each ride) The problem i have is that it is an old shock And spending 2k on a service every so often is not worth the value given the bike's age. I want a shock that is cheap, cheap to maintain for thus bike, doesnt matter if i lose feel quality. Lockout seems to not work but i dont care about lockout. Edited November 3, 2023 by Dean111 Link to comment Share on other sites More sharing options...
Dean111 Posted November 2, 2023 Share 16 hours ago, Armandt_R said: The shop that I use to help me with my "projects" is Kroff Cycles here in Paarl, Western Cape. lol, I've built a few franken bikes during the last few years, and they help me modify parts where needed. Your situation typically sounds like one of my projects. It's fun. Please remember to post pics when you are done. I am also genuinely interested in how your solution works out, it might give a few old dual suspension bikes new life. Thanks for sure i'm trying to get ideas/options thats why am posting here will send Kroff Cycles a message too thanks Link to comment Share on other sites More sharing options...
droo Posted November 2, 2023 Share Service it. You're not going to find anything else than fits that frame. patches, JM Rides Bikes and Toasted marshmallows 1 1 1 Link to comment Share on other sites More sharing options...
Dean111 Posted November 3, 2023 Share .. Edited November 3, 2023 by Dean111 No response Link to comment Share on other sites More sharing options...
Bicycle Yard WESTERN CAPE Posted November 5, 2023 Share On 11/2/2023 at 12:39 PM, Dean111 said: Measuring from the outside with a ruler seems to be 130mm eyelit to eyelit Can width 43mm. Do you perhaps have an idea ? Alternate shock ? Custom ? Tried finding one but it's a bit hard. Trying to look for a old Cannondale scalpel frame, those shocks should be about that dimension as well. And they go for fairly cheap. Keeping an eye out ! Link to comment Share on other sites More sharing options...
patches Posted November 6, 2023 Share On 11/2/2023 at 11:52 PM, droo said: Service it. You're not going to find anything else than fits that frame. What Droo said. Cannondale (particularly Jekyll's) like to use proprietary rear shocks (like the Fox DYAD pull shock on the 2015 Jekyll I once had). Little/no other bikes use them. The Jekyll 800 is no exception. To find something with that same eye-to-eye and stroke that isn't from a Jekyll 800 will be tricky as that bike had the one shock mount midway up the air-can, with a pre-load collar. Jekyll 800 Rear Shock Conventional Rear Shock As you can see the eye-to-eye to stroke ration on the Jekyll shock is quite close, compared to a conventional rear shock. So finding something else with an eye-to-eye that small (not to mention the correct stroke), will be nigh impossible.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now