GSG Posted January 26, 2016 Posted January 26, 2016 Hi all. Looking for some advice: I've recently changed from a 2x10 to a 1x10.On my 2x10 in front ran a 38t and 26t and at the back 11-36. I've now converted to a 32t in front and 11-40 at the back. I noticed when pedalling down hill I get to about 35km/h and I am spinning out like crazy, on the flip side climbing isn't a problem or on the flats. The advice I need is: Is this normal or should I change to a 34t in front or is there something that can be done with the cassette? If there is a link where this has been discussed previously please post it. Thank in advance!
Jakkals. Posted January 26, 2016 Posted January 26, 2016 Rather ride 34T with 42:11 cassette. I spin out at 45km/h. More than enough for any mtb race.
PregoRoll Posted January 26, 2016 Posted January 26, 2016 Rather ride 34T with 42:11 cassette. I spin out at 45km/h. More than enough for any mtb race. Anyone make a wide range cassette for 10sp? I have a major ratio issue running a 32T 11-36, the gaps between gears are miles too big in some places.
robsc Posted January 26, 2016 Posted January 26, 2016 34 oval with an 11-42 , almost perfect for any conditions
robsc Posted January 26, 2016 Posted January 26, 2016 Anyone make a wide range cassette for 10sp? I have a major ratio issue running a 32T 11-36, the gaps between gears are miles too big in some places.He Prego , the 11-36 is quite close (for a 10 speed) if you go wider (11-40/42) you are going to have an even wider gap between gears
GSG Posted January 26, 2016 Author Posted January 26, 2016 Rather ride 34T with 42:11 cassette. I spin out at 45km/h. More than enough for any mtb race.Thanks! Any idea where I can get a 42?
GSG Posted January 26, 2016 Author Posted January 26, 2016 Anyone make a wide range cassette for 10sp? I have a major ratio issue running a 32T 11-36, the gaps between gears are miles too big in some places.What sort of speeds to you get when pedalling down hill or is this not an issue for you?
Sparki 1 Posted January 26, 2016 Posted January 26, 2016 I also wanted to "upgrade" to a 1x10 or 1x11spd. but when i see all the issues that comes with it i wonder if it is an "upgrade" especially with me not having any issues with my 2x10 xtr setup and the fact that I only have 1 mtb.
PregoRoll Posted January 26, 2016 Posted January 26, 2016 What sort of speeds to you get when pedalling down hill or is this not an issue for you? im spinning out at around 37km/h, honestly if your pedalling faster your going downhill, The only issue I have is towards the bottom (11T) of my cassette the gaps are large. you go from spinning to pushing way too hard of a gear... Maybe some Gym work is needed?
Cas_1 Posted January 26, 2016 Posted January 26, 2016 Did a 1 x 1o conversion a few weeks ago. Went with 11-36 and 32t oval. I also spin out a bit around 40-45km. Climbing however is really nice. Would also however recommend going 11-42 with 32/34.
Sani Posted January 26, 2016 Posted January 26, 2016 34 oval with an 11-42 , almost perfect for any conditions I ride with this set up as well , works perfectly for Me .
GSG Posted January 26, 2016 Author Posted January 26, 2016 Did a 1 x 1o conversion a few weeks ago. Went with 11-36 and 32t oval. I also spin out a bit around 40-45km. Climbing however is really nice. Would also however recommend going 11-42 with 32/34.Thank you! Will you be changing over any time soon?
robsc Posted January 26, 2016 Posted January 26, 2016 Thanks! Any idea where I can get a 42?You can get a whole cassette from Kiwi here on Bikehub . He does the 10 speed and 11 speed cassettes www.rapide.co.za
Jakkals77 Posted January 26, 2016 Posted January 26, 2016 I believe that a 34t upfront with a 11-40 or 42 setup is perfect for almost all terrain. You start spinning out at approximately 58 km/h which is more than enough speed for a mountain bike and the climbing is very easily doable for most riders. I think Kitted has recently launched their 40 and 42 extenders. Give them a call or visit their website and order there.
GSG Posted January 26, 2016 Author Posted January 26, 2016 I also wanted to "upgrade" to a 1x10 or 1x11spd. but when i see all the issues that comes with it i wonder if it is an "upgrade" especially with me not having any issues with my 2x10 xtr setup and the fact that I only have 1 mtb. I too have one MTB and don't think that its too much of an issue, but more finding out what bests suits the individual. I always like to try things out and if it doesn't work then revert back to what i am used to, but if it does work than bonus
GSG Posted January 26, 2016 Author Posted January 26, 2016 im spinning out at around 37km/h, honestly if your pedalling faster your going downhill, The only issue I have is towards the bottom (11T) of my cassette the gaps are large. you go from spinning to pushing way too hard of a gear... Maybe some Gym work is needed? Haven't come across that problem or maybe I change too late
Recommended Posts
Archived
This topic is now archived and is closed to further replies.