davetapson Posted September 21, 2011 Share Oooh niiiice... So, I have a couple of questions!! 1. Where did you source your chain ring / rear sprocket? Was just about to hit the button on an order to CRC but didn't want to pay R300 for tracked delivery...2. What hub did you use? BMX? Track?3. What ratio are you running? I'm thinking of 39 / 16.4. The paint on the inside of the rims - I've been contemplating that, but was wondering how to keep the point where there brake pads paint free - but still have a nice circular finish on the paint edge? It's turned out really nicely - you must be well chuffed!! Link to comment Share on other sites More sharing options...
davetapson Posted September 21, 2011 Share How's it going with the project?Geez - it's primed and ready for painting. I've got twins and the missus has been working / some other issue these last few weekends and I've just not had enough time in a row to be sure I can lay a couple of coats all within one hour of each other. But once I've got the top coat on, then I'll be back to where I can work on it in short spurts again. Link to comment Share on other sites More sharing options...
divernick Posted September 21, 2011 Share Geez - it's primed and ready for painting. I've got twins and the missus has been working / some other issue these last few weekends and I've just not had enough time in a row to be sure I can lay a couple of coats all within one hour of each other. But once I've got the top coat on, then I'll be back to where I can work on it in short spurts again. I know all about time crunch with little kids! Good luck and keep us updated! Link to comment Share on other sites More sharing options...
crankbrother Posted September 21, 2011 Share Oooh niiiice... So, I have a couple of questions!! 1. Where did you source your chain ring / rear sprocket? Was just about to hit the button on an order to CRC but didn't want to pay R300 for tracked delivery...2. What hub did you use? BMX? Track?3. What ratio are you running? I'm thinking of 39 / 16.4. The paint on the inside of the rims - I've been contemplating that, but was wondering how to keep the point where there brake pads paint free - but still have a nice circular finish on the paint edge? It's turned out really nicely - you must be well chuffed!!Hey Dave, sorry for the slow reply.Chain ring and hub came from old track bike they had lying around @ a shop. So, its all track, no bmx.The saddle is bmx. The handle bars i got from King cycles in worcester, they're a very old shop and have lots of odds lying around. Rear sprocket i bought from an high school guy that raced track and decided to go emo and quit. Rims i cheated and bought an already painted pair...shhh. I'll post you a cool gear inch chart i'm using, usually i keep it in the mid 70's. Think i'm running 18-48 or some odd currently, i'll have to check. Link to comment Share on other sites More sharing options...
crankbrother Posted September 21, 2011 Share Dave, some pics you might dig. The black and white one is some guy's tatoo! RAD! Link to comment Share on other sites More sharing options...
divernick Posted September 21, 2011 Share Oooh niiiice... So, I have a couple of questions!! 1. Where did you source your chain ring / rear sprocket? Was just about to hit the button on an order to CRC but didn't want to pay R300 for tracked delivery...2. What hub did you use? BMX? Track?3. What ratio are you running? I'm thinking of 39 / 16.4. The paint on the inside of the rims - I've been contemplating that, but was wondering how to keep the point where there brake pads paint free - but still have a nice circular finish on the paint edge? It's turned out really nicely - you must be well chuffed!! Get in on a CRC order with some other guys. https://community.bikehub.co.za/topic/106551-chain-reaction-order/page__p__1495847?do=findComment&comment=1495847 Edited September 21, 2011 by divernick Link to comment Share on other sites More sharing options...
davetapson Posted September 22, 2011 Share Thanks Crank and Nick, much appreciated. Have dropped KDEE my order. Link to comment Share on other sites More sharing options...
Tom Ezekiel Posted September 22, 2011 Share So, I have a couple of questions!! 1. Where did you source your chain ring / rear sprocket? Was just about to hit the button on an order to CRC but didn't want to pay R300 for tracked delivery... I have Dura Ace track sprockets (16T) for sale. R200 per sprocket (add R50 for delivery). NOS still in boxes. Link to comment Share on other sites More sharing options...
davetapson Posted September 23, 2011 Share I have Dura Ace track sprockets (16T) for sale. R200 per sprocket (add R50 for delivery). NOS still in boxes. Hi Tom I don't have a track hub - I think those have a thread mounting? If I get a track hub, I will bear this in mind. ThanksDave Link to comment Share on other sites More sharing options...
Tumbleweed Posted September 27, 2011 Share Hi Tom I don't have a track hub - I think those have a thread mounting? If I get a track hub, I will bear this in mind. ThanksDave I have a hub that may work for you… Link to comment Share on other sites More sharing options...
Hairy Posted September 27, 2011 Share Eggsovereasy has it as one of his markings... It also looks like you left the lower part of the headset in the frame when spraying? Link to comment Share on other sites More sharing options...
davetapson Posted September 28, 2011 Share I have a hub that may work for you…Sounds interesting - whatcha got..? Link to comment Share on other sites More sharing options...
davetapson Posted September 28, 2011 Share It also looks like you left the lower part of the headset in the frame when spraying?Yep - the chrome races are still in the headset - I wanted them painted black - don't want chrome if I can avoid it. Link to comment Share on other sites More sharing options...
Tumbleweed Posted September 28, 2011 Share Sounds interesting - whatcha got..? Very basic Joytech hub which should accept a track sprocket. It may fit. Link to comment Share on other sites More sharing options...
davetapson Posted September 28, 2011 Share I'll try pop in Saturday for a chat. Will need to chat to Paul about rebuilding the wheel. They're replacing my MTB frame by the way, but with a Sensor, not the orig frame. Only prob is I need to buy a new rear shock as the one on my bike is too short... R3.8k At least I should no longer have that particular self-destructing frame in the future... and a new shock. Anyone need a second hand Fox RP2 in good nick? Anyone? Link to comment Share on other sites More sharing options...
divernick Posted September 28, 2011 Share Hey Dave, If you replace that 105 hub with a track one, please consider donating it back to me for My Initiative - Build-a-Bike Now get building, we wanna see that fixie roll! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now