Decals

[EggsBox]

Ok I can google it, but where can I find someone to do decals on a road frame and wheels?

Recommendations appreciated!

[Longbarn Killer]

There is a guy on the Hub who makes decals. Cannot remember his name, but do a search on decals. His name might be Tyronne, but I'm not too sure.

[brad890]

here this is who you need to contact

 

https://www.bikehub.co.za/forum/user/10036-tyerone/

 

i know he does the fork and wheel decals you see for sale here on hub

[RoCkFoRdGuN]

I do custom decals any thing u want, i can make and get printed i did some fox stickers for a guy and his really happy.

 

www.stickerstash.co.za

 

I also do car decals

Ps3 and Xbox skins

Edited August 31, 2011 by RoCkFoRdGuN

[AndreZA]

Rockfordgun, can you print white on clear?

[Grebel]

Rockfordgun, can you print white on clear?

 

Hehehe! You need special equipment for that. I been doing some research and you can buy clear vinyl (Need to find a retail outlet) that you can put through a deskjet printer at home and print your own, just not white...

[RoCkFoRdGuN]

I have proffesional guys printing it for me im sure they can do it

BUTTTT why do u want clear normal vinyl dont have no backing so it sticks right on

If u guys want i can check with them if they print on clear.

Was actually thinking of getting a section for bikes aswell

[AndreZA]

RFG, if you have small lettering you can not have it cut out because it is never sharp an you always loose the little bits inbetween the loops in some letters. Also after a while the corners lift on sharp edged letters. Not just on clear, but on black aswell. I don't a white sticker that is printed black just because there is a little bit of white on the inside. You are stuck then with a thin white edge underneath the black print that you can see if you stick it on a black background. I use to work on a Roland Color Cam and could do it, but I can not find anybody that still uses those dinosaurs. Oh and normally if they can do it, it requires a run of 100+.

Edited August 31, 2011 by AndreZA

[RoCkFoRdGuN]

RFG, if you have small lettering you can not have it cut out because it is never sharp an you always loose the little bits inbetween the loops in some letters. Also after a while the corners lift on sharp edged letters. Not just on clear, but on black aswell. I don't a white sticker that is printed black just because there is a little bit of white on the inside. You are stuck then with a thin white edge underneath the black print that you can see if you stick it on a black background. I use to work on a Roland Color Cam and could do it, but I can not find anybody that still uses those dinosaurs. Oh and normally if they can do it, it requires a run of 100+.

 

 

True but u can add a bleed around so the white doesnt stick out but i see your point very valid

hows about u show me the sticker u wanna replicate maybe i can get a trail run done ORRRRR i can post u the Fox stickers i made they look dam good.

[divernick]

Out of interest, what would you charge for a decal such as this, black vinyl cut out? (100mm high)

[ti guy]

Try CL Signs on 021-8875728 or 0725770000. I have had decals made for my Lynskey recently and they did a stellar job. They are also VERY cheap, R100 for 4 decals.

[AndreZA]

True but u can add a bleed around so the white doesnt stick out but i see your point very valid

hows about u show me the sticker u wanna replicate maybe i can get a trail run done ORRRRR i can post u the Fox stickers i made they look dam good.

 

Even if you print over the edge, there where it is cut, you see the micron thin white line of the vinyl. On a light surface it is not very visible, but on black it is.

[RoCkFoRdGuN]

Even if you print over the edge, there where it is cut, you see the micron thin white line of the vinyl. On a light surface it is not very visible, but on black it is.

 

Now precisley what u mean my previous guy that printed for me did that it looks crap but thats really good advice Andre ill keep it in mind i have been doing alot of car stuff and xbox and ps3 never went into bicycle stickers everyday u learn something new hey

[Dexter-morgan]

Hi Guys I used a company "creative stuff", they did mine did all the weeding and stuck it on transfer backing here is a pic of my work.

[RoCkFoRdGuN]

here we go sorry for the cell pic

Edited August 31, 2011 by RoCkFoRdGuN

[RodTi]

Try CL Signs on 021-8875728 or 0725770000. I have had decals made for my Lynskey recently and they did a stellar job. They are also VERY cheap, R100 for 4 decals.

 

In Stellenbosch?