Paul Ruinaard Posted February 20, 2014 Share So i am busy with a CX bike build. I am planning to use a Chinese frame with mechanical discs etc, so no problem there. The issues and questions arise around wheels. Has anyone got any advice wrt wheels seen as though I will be using disc wheels? My questions arise around tyres - what width rims to run, what rims to run, what tires to run using road disc. I would be using mechanical CX 77 calipers on 105 or Ultegra shifters. Will 29er MTB wheels fit assuming axle widths are correct? Has anyone got any experience in this area or know anyone that can guide me around this. I would like to build a one size conquers all bike - something i can ride on road but when i decide to go down a side road that is dirt i want to be able to do it. Seems like the wheels are critical to this and there is a lot of confusing information. Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/ Share on other sites More sharing options...
eddy Posted February 20, 2014 Share Try these: https://www.bikehub.co.za/classifieds/80553-xc29er-carbon-wheels/ I have Canti brakes on my CX bike and run normal road rims; mostly Mavic open pros but once or twice a set of Enves. They both work fine. Either have a set or road rims built onto disk hubs, or look at a nice and light set of 29er wheels. You can run 35mm tyres on either. Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219759 Share on other sites More sharing options...
Thug Posted February 20, 2014 Share Yes, 29er rims/wheels can be used. I used 29" WTB i19's as the rims for my CX bike. Hub sizes were 100mm front and 135mm rear Edited February 20, 2014 by Thug Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219782 Share on other sites More sharing options...
Flowta Posted February 20, 2014 Share So i am busy with a CX bike build. I am planning to use a Chinese frame with mechanical discs etc, so no problem there. The issues and questions arise around wheels. Has anyone got any advice wrt wheels seen as though I will be using disc wheels? My questions arise around tyres - what width rims to run, what rims to run, what tires to run using road disc. I would be using mechanical CX 77 calipers on 105 or Ultegra shifters. Will 29er MTB wheels fit assuming axle widths are correct? Has anyone got any experience in this area or know anyone that can guide me around this. I would like to build a one size conquers all bike - something i can ride on road but when i decide to go down a side road that is dirt i want to be able to do it. Seems like the wheels are critical to this and there is a lot of confusing information. I saw this set of CX disc wheels on thehubsa yesterdayhttps://www.bikehub.co.za/classifieds/79318-cyclocross-disc-wheelset-price-drop/ Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219796 Share on other sites More sharing options...
Cellar Posted February 20, 2014 Share The issues and questions arise around wheels. Has anyone got any advice wrt wheels How tall are you? Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219799 Share on other sites More sharing options...
Paul Ruinaard Posted February 20, 2014 Share How tall are you?1,8m Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219816 Share on other sites More sharing options...
kennyg Posted February 20, 2014 Share I have tubby MTB wheels that you can run 30-55mm tubby tyres on. Alu and carbons. Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219825 Share on other sites More sharing options...
Cippo Posted February 20, 2014 Share Pm didi. He is buliding one at the moment. He posted a pic in Boast about your purchases recently. Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219827 Share on other sites More sharing options...
Cellar Posted February 20, 2014 Share 1,8m Oh dear... https://community.bikehub.co.za/topic/136539-cycle-lab-settles-the-wheel-size-debate-once-and-for-all/ Tuxstir and Jewbacca 2 Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2219840 Share on other sites More sharing options...
DeFconOK Posted February 22, 2014 Share xt or xtr hubs(for super solid) or Shimano CX75 Hubs(Ultegra CX disk) on open pros or tandems rims, 32 to 36 hole 700c is pretty much 28 inches so 29' should be good unless there is a super tight tolerance between the wheel and seat tube. 19c to 21c rims should be ideal for 35c tires. Bigger the tire, bigger the rim. If the rim is to narrow or wide, handling and safety are compromised Kenda make some rad 35c tires. the kwest is cheap heavy and close to indestructible. would definitely consider getting a set built for your purpose tho. If you have access to a good wrench it helps. And a custom set that is well built makes for a good ride and lets you match everything nicely Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2221428 Share on other sites More sharing options...
Chro Mo Posted February 22, 2014 Share I have 36H DRC rims on XT hubs as well as 36H Open pros on Deore hubs - both disc. Both work well. Cup and cone hubs can last indefinitely if serviced regularly and well. Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2221435 Share on other sites More sharing options...
Dustbug Posted February 24, 2014 Share Im using the mavic crossride rim and hub on a BMC Granfondo2 frame solid carbon front fork with conti gatorskin 28mm pumped to 7 bar for the road and conti 35mm xking for dirt road etc pumped to 6.5bar, Ive fitted a flatbar with xt shifters and xt hydraulic brakes and a 105 crank 50/38 front chainrings group with rear 11-28 rear cassette, a very comfortable ride.I did have to put on a XT rear derailleur as the road one is not 100% compatible. I weigh in at 96 kgs. Link to comment https://forum.bikehub.co.za/topic/136551-want-to-build-a-cyclocross-bike-what-wheels-to-us/#findComment-2222582 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now