Thiago Zanella Posted October 23, 2018 Posted October 23, 2018 It shouldn't be a problem? Have you taken the rest of the lever apart? When I try to remove the first screw that speaks the tutorial, the key turns false, I have to buy another one better. But I saw that it is necessary to remove this bolt too ... or not?That's the question, how can I remove this screw? I've never seen a screwdriver like this.
Meezo Posted October 23, 2018 Author Posted October 23, 2018 When I try to remove the first screw that speaks the tutorial, the key turns false, I have to buy another one better. But I saw that it is necessary to remove this bolt too ... or not?That's the question, how can I remove this screw? I've never seen a screwdriver like this. taken from here http://forums.mtbr.com/brake-time/shimano-zent-812550.html#post9831481 http://forums.mtbr.com/attachments/brake-time/734475d1359601749t-shimano-zent-setup.jpg http://forums.mtbr.com/attachments/brake-time/734477d1359601749t-shimano-zent-lever.jpg http://ficdn.mtbr.com/images/misc/paperclip.png Attached Images http://forums.mtbr.com/attachments/brake-time/734476d1351705069-shimano-zent-tip.jpg
Thiago Zanella Posted October 23, 2018 Posted October 23, 2018 taken from here http://forums.mtbr.com/brake-time/shimano-zent-812550.html#post9831481 http://forums.mtbr.com/attachments/brake-time/734475d1359601749t-shimano-zent-setup.jpg http://forums.mtbr.com/attachments/brake-time/734477d1359601749t-shimano-zent-lever.jpg http://ficdn.mtbr.com/images/misc/paperclip.png Attached Images http://forums.mtbr.com/attachments/brake-time/734476d1351705069-shimano-zent-tip.jpg OMG, ok, thanks. I'll try
Thiago Zanella Posted October 23, 2018 Posted October 23, 2018 I removed the 2mm allen screw... but now the PIN does not come out... Does it take too much force?
Meezo Posted October 23, 2018 Author Posted October 23, 2018 Yes put the lever on a flat surface use an allen key the slight smaller than the pin and give it a soft tap with a rubber mallet, or even a hit with your hand if you have man hands, and not computer hands like me
Thiago Zanella Posted October 23, 2018 Posted October 23, 2018 Oh, thank you so much. I finally got to the last step. But now the piston dont want to leave..., should I push it where the hose enters? It's hard, do not move.
Thiago Zanella Posted October 23, 2018 Posted October 23, 2018 I'm more than 30 minutes trying to put this together, without success.
Thiago Zanella Posted October 23, 2018 Posted October 23, 2018 I got it, I was missing the position of the spring, it's over the lever. Now it's pouring oil and twisting so I have not screwed much.
The Bull Shark Posted April 8, 2019 Posted April 8, 2019 Hi I am misusing this old thread for my problem. I sometimes have pressure when pulling the lever, and sometimes not. Found it impossible to bleed the brakes. I checked for leaks, and have none. What could be the issue?
The Bull Shark Posted April 8, 2019 Posted April 8, 2019 air in the system Already tried bleeding. It just never develops resistance at the lever. I have bled Shimano brakes many times before, but this time I am not coming right. Which makes me thinks the seals are stuffed.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.