billygoat0523 Posted February 2, 2017 Posted February 2, 2017 Hey hubbers, I want to convert my Scalpel SI-3 (2017) to xx1 eagle groupset. Just want to find out what XD driver body I need and where the best place would be to get one.
BaGearA Posted February 2, 2017 Posted February 2, 2017 There is only one Xd driver currently available , just get the correct one for your wheels. The shop where you bought the bike should be able to help.
Captain Fastbastard Mayhem Posted February 2, 2017 Posted February 2, 2017 What he said ^^^ Except should be the correct one for the hub, strictly speaking
Rudi Pollard Posted February 3, 2017 Posted February 3, 2017 Yip, what hubs do you have. That will determine which freehub you should get... Sent from my SM-G930F using Tapatalk
billygoat0523 Posted February 3, 2017 Author Posted February 3, 2017 It's the standard hubs that came with the bike. From the manufacturer's website: HUBSCZero Straight Pull, Lefty 60 front, 39-point engagement rear, 142x12, 28h (Ai Offset dish - Rear)
Spoke101 Posted February 3, 2017 Posted February 3, 2017 It's the standard hubs that came with the bike. From the manufacturer's website: HUBSCZero Straight Pull, Lefty 60 front, 39-point engagement rear, 142x12, 28h (Ai Offset dish - Rear) Talk on the street is that they are OEM Formula hubs and the rears in particular are pretty $hit, but this was 2015/2016 not sure if it's a new hub for 2017. As for where to get a XD Freehub, any bike shop should be able to order you one from Omnico. However if its still the old hub I would look at replacing the whole thing.
billygoat0523 Posted February 3, 2017 Author Posted February 3, 2017 got it sorted out eventually. seems the bike shops are rather busy
Recommended Posts
Archived
This topic is now archived and is closed to further replies.