pk007za Posted March 2, 2019 Posted March 2, 2019 How does is climb and corner at 140mm? I find that with the rigid, which is lil over 500mm A2C measurement, climbs originally felt like the front was too high and unweighted. But then I realised actually it's my fitness..Reasonably fit now and commuting weekly again, and cornering is tops at this BB height. I had it at a lower BB height as well which was also fine but straights suffered. Actually how does one really know if the A2C at 140mm will be fine? How to judge? Or what's it based on. Looks wise I'm sure it will appear very attractive, especially with the thin tubing and thick suspension pipes. It all depends how you setup your sag. 10% sag is going to feel like a tower compared to 30-35%. the 140mm @ 30% feels just perfect, makes me lean forward into climbs and tech sections, but it never feels like its "nose light"
TAAHIRWP Posted March 3, 2019 Posted March 3, 2019 The blue grey orange frameSo..... when... erhmmm.. do we like.... get to see.... erhmmm... what you building it up with?
TAAHIRWP Posted March 3, 2019 Posted March 3, 2019 The blue grey orange frameSo..... when... erhmmm.. do we like.... get to see.... erhmmm... what you building it up with?
Hairy Posted March 3, 2019 Posted March 3, 2019 It is going to be a very slow build as it is a bike that I don't "need" right now and there are other things at home requiring cash. Jewabaca has a rigid fork or two that have my intense interest. I am waiting around 2-3weeks now for a reply from EVO bikes for feedback on a set of bearings and a rear thru axel conversion kit for a set of Hope pro 2's (non evo) .... may have to start looking elsewhere. I have mounted the frame in my bike stand though, so the build has "started" I have the following:FrameWheels that req workGiant dropper that needs to be checked and req. a 30.9 to 31.6mm spacer ... so a can of something made from aluminium will have to be consumed and a ghetto spacer made.I have brakes that I think only need a bleed.Crank with SS cog and chainringPedals ... should have something in the spares binSaddle .... a rather uncomfortable saddle Need:TyresSeatpost clampHeadsetNot to loose my sense of humour So..... when... erhmmm.. do we like.... get to see.... erhmmm... what you building it up with?
TAAHIRWP Posted March 3, 2019 Posted March 3, 2019 It is going to be a very slow build as it is a bike that I don't "need" right now and there are other things at home requiring cash. Jewabaca has a rigid fork or two that have my intense interest. I am waiting around 2-3weeks now for a reply from EVO bikes for feedback on a set of bearings and a rear thru axel conversion kit for a set of Hope pro 2's (non evo) .... may have to start looking elsewhere. I have mounted the frame in my bike stand though, so the build has "started" I have the following:FrameWheels that req workGiant dropper that needs to be checked and req. a 30.9 to 31.6mm spacer ... so a can of something made from aluminium will have to be consumed and a ghetto spacer made.I have brakes that I think only need a bleed.Crank with SS cog and chainringPedals ... should have something in the spares binSaddle .... a rather uncomfortable saddle Need:TyresSeatpost clampHeadsetNot to loose my sense of humour So..... when... erhmmm.. do we like.... get to see.... erhmmm... what you building it up with?I use a piece of thin brass as a shim, works very well. I used a giant headset before, but now onto the momsen one.
pk007za Posted March 7, 2019 Posted March 7, 2019 Here she is in road-bike Guise, different wheels with Conti racekings, still 140mm, did a 110km ride yesterday, comfy, quick no problems:
TAAHIRWP Posted March 8, 2019 Posted March 8, 2019 Here she is in road-bike Guise, different wheels with Conti racekings, still 140mm, did a 110km ride yesterday, comfy, quick no problems: Tyres looking beeg on there. which are they? rims? 140mm doesnt look bad hey? i now have the same frame colour scheme as you.
pk007za Posted March 8, 2019 Posted March 8, 2019 Tyres looking beeg on there. which are they? rims? 140mm doesnt look bad hey? i now have the same frame colour scheme as you. 29 x 2.2, pretty thin actually, but roll well.
TAAHIRWP Posted March 11, 2019 Posted March 11, 2019 So i hope the guy who bought my frame does not get tooo upset with me, but, Check how nicely he rebuilt this frame. Looks HoT!!
Iwan Kemp Posted April 24, 2019 Posted April 24, 2019 Mine up for sale https://www.bikehub.co.za/classifieds/358853-momsen-st-f-custom-with-bogus-hasie-paint-job/
tristanmck Posted April 24, 2019 Posted April 24, 2019 I'm thinking of getting one of these frames for a build with some spare parts that are lying around. Momsen still has some good prices for these frames. Can anyone comment on the difference between the STF29 19 and STR29 21? Besides the fact that the STF as the slide dropout and different geometry. What is the purpose of a slide dropout? Thanks!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.