JK7 Posted September 2, 2018 Share Hi there Broke my chain on my Momsen AL529 after riding for 800km on it. My question- is what could be the cause with such low distance having been done? Broke while on a mild single track. What to know : I clean it after 9/10 ridesStarted using Squirt chain lube at about 600km I fixed it by using a master chain link. I now have two on the same chain - Is that a problem? So what should I check? Or should I send it bike for a service?Thanks ???????? Link to comment Share on other sites More sharing options...
'Kaze Pete Posted September 2, 2018 Share Hi there Broke my chain on my Momsen AL529 after riding for 800km on it. (Question A) My question- is what could be the cause with such low distance having been done? Broke while on a mild single track. What to know :(Statement 1) I clean it after 9/10 rides(Statement 2) Started using Squirt chain lube at about 600km(Statement 3) I fixed it by using a master chain link. I now have two on the same chain - (Question B) Is that a problem? So what should I check? Or should I send it bike for a service?Thanks Question AUser error:Not cleaning chain often enough - refer to your statement marked as (Statement A)Not lubing chain - You only started at 600km? - Refer to your statement marked as (Statement B) - Assuming this is MTB (because everybody is afraid of doing road on road bikesPossibly cross chaining?Possibly changing gears under power? Question BNo, if you refrain from user errors as mentioned under question A Statement 1No good enough Statement 2The inference is you did not lube the chain before that, as you have lots of detail about your actions, but nothing about your lubing strategy for first 600km. Your lube strategy is not good enough Statement 3Not a real issue, but given all the above, you borked that chain Link to comment Share on other sites More sharing options...
JK7 Posted September 2, 2018 Share Ha. Rather comprehensive answer. Thanks. Meant switched to dry lube from a more oil based lube at 600km. Never ride with a dry chain. You might be onto something with changing gears with power. Trying to reduce that where I can. Thanks for the feedback, glad two links won't cause an issue. Link to comment Share on other sites More sharing options...
Karman de Lange Posted September 2, 2018 Share I have same bike, 2700 odd km now, never cleaned my chain, just squirt lube every 2-3 rides.. Would think cross geared it at some point or someone fitted wrong pins at service.. I also run masterlink from day one.. no issue. Link to comment Share on other sites More sharing options...
Psyrax Posted September 2, 2018 Share Or it was just a bad chain and it broke - no one's fault. Link to comment Share on other sites More sharing options...
porqui Posted September 2, 2018 Share Question AUser error:Not cleaning chain often enough - refer to your statement marked as (Statement A)Not lubing chain - You only started at 600km? - Refer to your statement marked as (Statement B) - Assuming this is MTB (because everybody is afraid of doing road on road bikesPossibly cross chaining?Possibly changing gears under power? Question BNo, if you refrain from user errors as mentioned under question A Statement 1No good enough Statement 2The inference is you did not lube the chain before that, as you have lots of detail about your actions, but nothing about your lubing strategy for first 600km. Your lube strategy is not good enough Statement 3Not a real issue, but given all the above, you borked that chain Seriously !!! or should that be Seriously ??? To OP it could just be a manufacturing fault or one of many other causes.It is highly unlikely a chain will break because it is dirty or even not oiled. Yes it will squeal like a pig and wear super fast. I prefer not to use masterlinks but proper pins but you could make a whole chain of masterlinks - won't be as strong and not very smooth.Reducing power when changing gears is good but won't break a chain if you did not. (Oil is still the best lubricant - flame suite on) Link to comment Share on other sites More sharing options...
madmarc Posted September 2, 2018 Share Aaarg Really !! - The chain broke - fix it - deal with it - ride on - use as many super links as you like - use any old engine oil to lube it - Just don't waste any more time and effort on therapy sessions. Link to comment Share on other sites More sharing options...
Sepia Posted September 2, 2018 Share (Oil is still the best lubricant As the man says. Dry lube?????WTF Link to comment Share on other sites More sharing options...
26er Posted September 2, 2018 Share Too much power in your legs Link to comment Share on other sites More sharing options...
JK7 Posted September 2, 2018 Share Always amazes me that the most innocuous post can cause a flame war ???? But appreciate the responses. Could just be a faulty chain. Here to learn. Link to comment Share on other sites More sharing options...
JK7 Posted September 2, 2018 Share Seriously !!! or should that be Seriously ??? To OP it could just be a manufacturing fault or one of many other causes.It is highly unlikely a chain will break because it is dirty or even not oiled. Yes it will squeal like a pig and wear super fast. I prefer not to use masterlinks but proper pins but you could make a whole chain of masterlinks - won't be as strong and not very smooth.Reducing power when changing gears is good but won't break a chain if you did not. (Oil is still the best lubricant - flame suite on)Thanks, appreciate the info. Sounds like I didn't do too much wrong but these things happen. Link to comment Share on other sites More sharing options...
JK7 Posted September 2, 2018 Share Too much power in your legs Finally a reasonable answer Link to comment Share on other sites More sharing options...
dasilvarsa Posted September 2, 2018 Share Chain Snap usually happens a few rides after a chain drop.The chain drop causes one or more of the links to bend slightly.The slightly bent link will still work for a while but will eventually let go. (side plate failure)If you did have a chain drop on that chain inspect the whole chain and if there are any slightly bent links then replace the chain.Oil and Smoove are both very good lubricants but if used properly the Smoove will generally extend the life of the chain, cassette and chainrings. Chains running on Smoove pick up less sand on the ride. If you use Smoove you never need to degrease the chain. Cleaning with an oily rag and then applying more Smoove is adequate. (Check the Smoove Website for full instructions.)http://www.smoovelube.com/ Link to comment Share on other sites More sharing options...
Oufy MTB (Roadie) Posted September 2, 2018 Share Finally a reasonable answerDefinitely Link to comment Share on other sites More sharing options...
BaGearA Posted September 2, 2018 Share Flame suit on Link to comment Share on other sites More sharing options...
Martin PJ Posted September 2, 2018 Share If you are a big guy, you can break a lot of chains. If there is a pin not riveted in properly this can break, either manufacturer fault or not installed properly when new. I have seen a bike shop remove a chain and rivet it back with the normal pin they removed. This is a disaster waiting to happen. Also never soak a chain in degreaser for any long period. This will wreck it. If you do, brief soak, then wash it off. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.