I have a Anthem 29er, and I did the tubeless myself. Tips: * Use Gorilla tape. This is by far the easiest, most durable way to seal and line your rim. You will have to use some elbow grease to fit it on tightly, but is quite easy. Get the 25mm one, as is. Make sure you overlap it about 20cm. * Make little hole for valve. I use the Stan's stuff, much better IMHO than the DT Swiss stuff that comes with Giant. * Pump and seat your tyre first with a tube, to let it push the Gorilla tape in place... Pump it hard (4 bar). Take out and check the tape. * I have used every single tubeless tyre on the market, and have settled for the last 2 years on Spez Ground Control front and Fast Track back. I seat my tubes with a normal footpump, no bombs, compressors etc required. Same as one guy said, put on the one side first, then the other side, keeping a bit open with tyre lever to put in your Stans. * Again, I use Stan's sealant. Not cheap, but works the best. Put about 100mm in for 2.2 tyre. Bit more if you want. * Make sure your valve is not open to the side. Put footpump on, and pump it... Might take a couple of strokes for it to take (sorry... ), but it will eventually. SORTED. This whole process takes me 10min per wheel.
