Your Enduro ride

[CubeD]

That's Oli Munnicks old bike not so?

I think you are right - just googled and found this pic :

http://www.bicycling.co.za/wp-content/uploads/2012/12/Oli_Enduro1.jpg

Check the bars - silver wasn't oem, and would also explain why the rear rim was beaten to death!

http://i1112.photobucket.com/albums/k500/RedLadder/DSC_0462.jpg

No wonder the guys at Mike's Bikes said that everything was dial'd in on the bike

[MaXiMuM]

^^^^ Nice!

[CubeD]

^^^^ Nice!

Shot, quite rad to have to story behind the bike now, hmmm wonder if a signature would increase its value

[YUMEYA]

Why is that bike so cheap and the guys neg, it looks like new and the ad says only ridden for 100hrs and it's just had the suspension serviced by Spez no doubt at their rather enormous charge?

It's like the guy is trying to give it away.

 

funny, it is not a spez fork.

[DubbelBuys]

What frame protection do you guys use / suggest for the downtubes ?

 

Stick on silicone tape (like BBB)

or plastidip

or a proper mudguard made of plastic

 

If a hard mudguard is the best option then I am looking for 2 different types. Both large (-ish) downtubes

 

 

1 is for the Shova (square tubing)

the other is for the Reign.

[Flowta]

A colleague of mine has this Rocky Mountain Switch SL for sale, a bit of an oldie but a good bike.

http://www.thehubsa....tain-switch-sl/

[Nofearnofun]

After a few months with my new steed I am finally happy with all her components and ready to post her here

 

Frame: Cannondale Jekyll.

Fork: RS Revelation RCT3.

Drive train: Zee crank and RD, Raceface NW 34t, SLX 11-36 cassette and chain, Saint shifter.

Pedals: Saint.

Wheels: Dartmoor Raiders on Superstar components Switch Evo hubs.

Tyres: Maxxis High roller 2.35"/WTB Bronson 2.3".

Stem: Loaded Amx.

Bars: Renthal fatbar 780mm.

Brakes: SLX with 203/180 Hope floating rotors.

Seatpost: KS i950.

Saddle: WTB Volt.

[Captain Fastbastard Mayhem]

After a few months with my new steed I am finally happy with all her components and ready to post her here

 

Frame: Cannondale Jekyll.

Fork: RS Revelation RCT3.

Drive train: Zee crank and RD, Raceface NW 34t, SLX 11-36 cassette and chain, Saint shifter.

Pedals: Saint.

Wheels: Dartmoor Raiders on Superstar components Switch Evo hubs.

Tyres: Maxxis High roller 2.35"/WTB Bronson 2.3".

Stem: Loaded Amx.

Bars: Renthal fatbar 780mm.

Brakes: SLX with 203/180 Hope floating rotors.

Seatpost: KS i950.

Saddle: WTB Volt.

 

Nice, bro! Your old ride isn't a PATCH on this... (snigger)

[Hairy]

After a few months with my new steed I am finally happy with all her components and ready to post her here

 

Frame: Cannondale Jekyll.

Fork: RS Revelation RCT3.

Drive train: Zee crank and RD, Raceface NW 34t, SLX 11-36 cassette and chain, Saint shifter.

Pedals: Saint.

Wheels: Dartmoor Raiders on Superstar components Switch Evo hubs.

Tyres: Maxxis High roller 2.35"/WTB Bronson 2.3".

Stem: Loaded Amx.

Bars: Renthal fatbar 780mm.

Brakes: SLX with 203/180 Hope floating rotors.

Seatpost: KS i950.

Saddle: WTB Volt.

Pity about the poor quality photography for such a high quality bike ... try again please!

[Nofearnofun]

Pity about the poor quality photography for such a high quality bike ... try again please!

 

Will post more pictures next week then, I left the bike down in KZN.

[MaXiMuM]

After a few months with my new steed I am finally happy with all her components and ready to post her here

 

Frame: Cannondale Jekyll.

Fork: RS Revelation RCT3.

Drive train: Zee crank and RD, Raceface NW 34t, SLX 11-36 cassette and chain, Saint shifter.

Pedals: Saint.

Wheels: Dartmoor Raiders on Superstar components Switch Evo hubs.

Tyres: Maxxis High roller 2.35"/WTB Bronson 2.3".

Stem: Loaded Amx.

Bars: Renthal fatbar 780mm.

Brakes: SLX with 203/180 Hope floating rotors.

Seatpost: KS i950.

Saddle: WTB Volt.

 

I think I died a little bit... That is a sweet ride!

[Steven Knoetze (sk27)]

Could anybody help me with a price and where I could get the chain device shown in the pic attached. It is a chainstay protector with catcher in one.

I have tried my local Spez dealership and 4 days later still awaiting any form of feedback.

Any help would be appreciated.

[Brian Fantana]

Could anybody help me with a price and where I could get the chain device shown in the pic attached. It is a chainstay protector with catcher in one.

I have tried my local Spez dealership and 4 days later still awaiting any form of feedback.

Any help would be appreciated.

 

There is another brand, who makes a similar chain guide. It is Bionicon and the model is the C-guide.

 

I am not sure if they have an agent in SA.

 

Have a look here: http://bionicon.com/parts/c-guide/c-guide-v02.html#buy

[Steven Knoetze (sk27)]

There is another brand, who makes a similar chain guide. It is Bionicon and the model is the C-guide.

 

I am not sure if they have an agent in SA.

 

Have a look here: http://bionicon.com/...de-v02.html#buy

 

Thanks, that will be perfect.

Have seen them before yes, if anybody knows of a distributor, just give me a shout.

[gwhite]

Could anybody help me with a price and where I could get the chain device shown in the pic attached. It is a chainstay protector with catcher in one.

I have tried my local Spez dealership and 4 days later still awaiting any form of feedback.

Any help would be appreciated.

 

I am not mistaken that chain guide comes standard with the Specialized bikes, just not sure which specific one.

[Iwan Kemp]

There is another brand, who makes a similar chain guide. It is Bionicon and the model is the C-guide.

 

I am not sure if they have an agent in SA.

 

Have a look here: http://bionicon.com/...de-v02.html#buy

 

I have a spare one if anyone is looking