Bateleur1 Posted March 21, 2017 Posted March 21, 2017 I suppose I am asking a question with a very obvious answer but just need to confirm. I can use any third party chain links on a chain (example Shimano) as long as the link is specific to the chain width (9, 10 or 11 speed chains). Looking in buying some chain links for the next time I replace a chain I would rather use links instead of pins.
Neill Du Toit Posted March 21, 2017 Posted March 21, 2017 I buy the KMC links and have used them on all kinds of chains. Even used a 9speed link once on a 10speed chain once in an emergency.
BeegMig Posted March 21, 2017 Posted March 21, 2017 Thats how I understand it.Otherwise im doing it wrong
LeoKnight Posted March 21, 2017 Posted March 21, 2017 I once had a problem fitting a KMC to a shimano chain. Both behind 10 speed. Not sure if it was just me or the chain but could not push through the link
Grease_Monkey Posted March 21, 2017 Posted March 21, 2017 I suppose I am asking a question with a very obvious answer but just need to confirm. I can use any third party chain links on a chain (example Shimano) as long as the link is specific to the chain width (9, 10 or 11 speed chains). Looking in buying some chain links for the next time I replace a chain I would rather use links instead of pins.Correct - you will find that some may struggle a bit more than others. Personally I find that a powerlink works well across the board.
porqui Posted March 21, 2017 Posted March 21, 2017 Best not to use chain link - have one in my pack for emergency only.
Bateleur1 Posted March 21, 2017 Author Posted March 21, 2017 Best not to use chain link - have one in my pack for emergency only. Why? Durability?
Ampandy Posted March 21, 2017 Posted March 21, 2017 Powerlink works well for me and never had a failure with them.
David Marshall Posted March 21, 2017 Posted March 21, 2017 Best not to use chain link - have one in my pack for emergency only.I always fit quick links to chains - customers included. I know that this is a no no with Shimano but how the hell do you clean a chain properly on the bike - or set the limit screws. Benefits far outweigh the disadvantages. Speed specific and you are good to go. I have the fancy Campy 11 speed pin fitting tool and a packet of pins - used three times. Cost R1800! If a pin fails count your blessings. It probably saved your hanger the or RD itself.
Bateleur1 Posted March 22, 2017 Author Posted March 22, 2017 I always fit quick links to chains - customers included. I know that this is a no no with Shimano but how the hell do you clean a chain properly on the bike - or set the limit screws. Benefits far outweigh the disadvantages. Speed specific and you are good to go. I have the fancy Campy 11 speed pin fitting tool and a packet of pins - used three times. Cost R1800! If a pin fails count your blessings. It probably saved your hanger the or RD itself. What would the disadvantages be? Till now I have only heard positives and the reason for me fitting would also be for the cleaning. So I am keen to find out what the down side of it could be.
MTBeer Posted March 22, 2017 Posted March 22, 2017 What would the disadvantages be? Till now I have only heard positives and the reason for me fitting would also be for the cleaning. So I am keen to find out what the down side of it could be.add weight. 0.05 grams heavier...
Halfdoesyn Posted March 22, 2017 Posted March 22, 2017 Never had any issues with my links - on MTB. Roadie (11 speed) came with a pin. Not sure why all the 11 speed links I have seen are single use.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.