Patchelicious Posted March 13, 2018 Posted March 13, 2018 This morning my Stages (Campy SR), 50km into a ride, started reading out some good numbers, now normally I would be ok with this, but we were going hard and said I was sitting at 700w, was probably more around 350w and it stayed high. I then stopped to calibrate it and got a Error 32, the tried again and got an error 0 and when I started going again, I was then sitting at 1200w.... maybe my Garmin520 took a Salbutamol puff or two, but I think its unlikely..... Anybody have some advice?
karma Posted March 13, 2018 Posted March 13, 2018 Sorry if you (probably) already checked the support docs, but here you go anyway: https://support.stagescycling.com/en/support/solutions/articles/1000132357-i-m-getting-an-error-or-failure-when-i-calibrate Remove battery, wait, wait a bit more, put it back, calibrate.
'Dale Posted March 13, 2018 Posted March 13, 2018 This morning my Stages (Campy SR), 50km into a ride, started reading out some good numbers, now normally I would be ok with this, but we were going hard and said I was sitting at 700w, was probably more around 350w and it stayed high. I then stopped to calibrate it and got a Error 32, the tried again and got an error 0 and when I started going again, I was then sitting at 1200w.... maybe my Garmin520 took a Salbutamol puff or two, but I think its unlikely..... Anybody have some advice? Calibration using the Stages App? Maybe some software is outdated. There's been a handful updates already for 2018. All the best.
Patchelicious Posted March 13, 2018 Author Posted March 13, 2018 Calibration using the Stages App? Maybe some software is outdated. There's been a handful updates already for 2018. All the best. Stages App... didnt even know there was one.... Thanks
lechatnoir Posted March 13, 2018 Posted March 13, 2018 I'd pull the battery for an hour and see what happens and check with stages app. then i'd try and run an update. good luck. let us know how this resolves... hopefully with out a spanner
cadenceblur Posted March 13, 2018 Posted March 13, 2018 having similar issues, returning mine o have it looked at.
Paulst12 Posted March 13, 2018 Posted March 13, 2018 I had a similar problem. Mine then went on the blink entirely. Eventually after sending it back and forth to Omnico, they updated the software and all is good again.My 2c worth... change the battery and update the software. If that doesn't work send it down to Omnico... it may take a week or two to get back, but should be all good.
Patchelicious Posted March 13, 2018 Author Posted March 13, 2018 I had a similar problem. Mine then went on the blink entirely. Eventually after sending it back and forth to Omnico, they updated the software and all is good again.My 2c worth... change the battery and update the software. If that doesn't work send it down to Omnico... it may take a week or two to get back, but should be all good.Bought mine from CWC, you think Omnico will help?
Butterbean Posted March 13, 2018 Posted March 13, 2018 First try download the app, update your software and calibrate through that... Sorted mine out when it was having a bad day..
BikeisLife Posted March 13, 2018 Posted March 13, 2018 Bought mine from CWC, you think Omnico will help?Give CWC a call. Mine just died on me on the weekend and CWC have arranged for it to be fetched today and they are going to send it to Omnico themselves and hopefully warranty it.
the_roadie Posted March 13, 2018 Posted March 13, 2018 This morning my Stages (Campy SR), 50km into a ride, started reading out some good numbers, now normally I would be ok with this, but we were going hard and said I was sitting at 700w, was probably more around 350w and it stayed high. I then stopped to calibrate it and got a Error 32, the tried again and got an error 0 and when I started going again, I was then sitting at 1200w.... maybe my Garmin520 took a Salbutamol puff or two, but I think its unlikely..... Anybody have some advice? Is this a Gen2 stages? I had a very similar problem last year. It might have had something to do with the temperature. Went for an early ride in Suikerbosrand one winter morning and power reading was all over the place. Did the reset etc. but ended up contacting Stages. Their support is really good. My issue resolved itself once I replaced the battery with a new one (although the other battery was still new). Could also be a connection issue between the power meter and your head unit.
Cat2forLife Posted March 13, 2018 Posted March 13, 2018 Bought mine from CWC, you think Omnico will help? Yeah, CWC get their Stages from Omnico
Macdawg80 Posted March 13, 2018 Posted March 13, 2018 This morning my Stages (Campy SR), 50km into a ride, started reading out some good numbers, now normally I would be ok with this, but we were going hard and said I was sitting at 700w, was probably more around 350w and it stayed high. I then stopped to calibrate it and got a Error 32, the tried again and got an error 0 and when I started going again, I was then sitting at 1200w.... maybe my Garmin520 took a Salbutamol puff or two, but I think its unlikely..... Anybody have some advice? This morning my Stages (Campy SR), 50km into a ride, started reading out some good numbers, now normally I would be ok with this, but we were going hard and said I was sitting at 700w, was probably more around 350w and it stayed high. I then stopped to calibrate it and got a Error 32, the tried again and got an error 0 and when I started going again, I was then sitting at 1200w.... maybe my Garmin520 took a Salbutamol puff or two, but I think its unlikely..... Anybody have some advice?what i would recommend is have a bit of cement for breakfast and HTFU and just hang onto your training partners wheel. Those numbers were real.
Patchelicious Posted March 13, 2018 Author Posted March 13, 2018 what i would recommend is have a bit of cement for breakfast and HTFU and just hang onto your training partners wheel. Those numbers were real. Hahaha, knob!
Paulst12 Posted March 13, 2018 Posted March 13, 2018 Bought mine from CWC, you think Omnico will help?Yup they are the suppliers
Grease_Monkey Posted March 13, 2018 Posted March 13, 2018 Yup they are the suppliersCWC don't *always bring in their products through oficial distributors, if that's the case Omnico won't necessarily help. *I could be wrong.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.