Jump to content

Helmet Spray Paint


Jackson123

Recommended Posts

Hi there fellow hubbers.

 

Looking to respray a helmet of mine which have faded after time and due to some hours in the sun.

 

Could anyone direct me or advise of someone who does helmet spray painting in the Gauteng area? As close as possible to Centurion.

 

Thanks for helping out.

Link to comment
Share on other sites

A spray will likely be more expensive than a new one.

 

If it’s that old, I would recommend buying a new one in anycase.

Link to comment
Share on other sites

The solvents in the spraypaint will most likely adversely affect the Poly meant to absorb impacts. 

 

Perhaps rather look at Wrapping the helmet, or replace as previously stated.

Link to comment
Share on other sites

Most manufacturers recommend that a helmet is replaced every 3 years. The sun and sweat breaks down the materials used in the helmet.

 

If yours is faded, most likely its safety has been compromised and you need a new one.

Link to comment
Share on other sites

The solvents in the spraypaint will most likely adversely affect the Poly meant to absorb impacts. 

 

Perhaps rather look at Wrapping the helmet, or replace as previously stated.

 

Thats what we were always told ....

 

Yet Bogus was spraying helmets for a team a few weeks back.

 

 

Maybe the technology changed .... or maybe they just mask of way better ....  either way, it is possible.

Link to comment
Share on other sites

Thats what we were always told ....

 

Yet Bogus was spraying helmets for a team a few weeks back.

 

 

Maybe the technology changed .... or maybe they just mask of way better ....  either way, it is possible.

Entirely possible to spray helmets safely - BUT - it's not justified by economics - much better and cheaper to just replace an old helmet.

Link to comment
Share on other sites

Hi there fellow hubbers.

 

Looking to respray a helmet of mine which have faded after time and due to some hours in the sun.

 

Could anyone direct me or advise of someone who does helmet spray painting in the Gauteng area? As close as possible to Centurion.

 

Thanks for helping out.

 

 

Link to comment
Share on other sites

Entirely possible to spray helmets safely - BUT - it's not justified by economics - much better and cheaper to just replace an old helmet.

 

JIP !

 

Major difference between a "team spray job" vs trying to revive an old lid ....

 

 

 

 

That said .... one day I may just cave in and buy an airbrush kit .... economical - heck NO, but imagine the fun (and frustration)

Link to comment
Share on other sites

JIP !

 

Major difference between a "team spray job" vs trying to revive an old lid ....

 

 

 

 

That said .... one day I may just cave in and buy an airbrush kit .... economical - heck NO, but imagine the fun (and frustration)

I've seen the way you do things - let me know when you cave and buy the kit, I'll courier my helmet down  :clap:

Link to comment
Share on other sites

I've seen the way you do things - let me know when you cave and buy the kit, I'll courier my helmet down  :clap:

 

Hiehie .... wallet needs time to recover from the last project ...   :whistling:

 

 

.... but those YouTube videos makes it look "so easy" to air brush ....  :w00t:   

 

 

SURE it cant be "that easy" ....  ^_^  guess there is only one way to find out ....  :whistling:

Link to comment
Share on other sites

OP, if you're really keen for some DIY..you can go to any RC hobby store and buy the Tamiya PS spray cans (NOT the TS!). That PS paint is made for polycarbonate...which a lot of helmets use over the styrofoam.  

Link to comment
Share on other sites

JIP !

 

Major difference between a "team spray job" vs trying to revive an old lid ....

 

 

 

 

That said .... one day I may just cave in and buy an airbrush kit .... economical - heck NO, but imagine the fun (and frustration)

you can borrow mine if you like... it's harder than it looks....
Link to comment
Share on other sites

you can borrow mine if you like... it's harder than it looks....

 

The "skill" of painting is one thing ... and I may be able to get that sorted with many many many hours of practice ...

 

The ART of air brushing is a totally different matter !!!  I know myself well enough to know THIS is the bit that is lacking .....

 

 

 

There was a gent that Chip Foose used to fly in to do his "true flames" - Mike Lavallee .... WOW !! .... 

 

https://www.killerpaint.com/mike.html

 

https://www.youtube.com/watch?v=_yAvztM8DMI

 

https://www.youtube.com/watch?v=pOABoWXWKy0

 

https://www.youtube.com/watch?v=46zwUaVxHRo

 

https://www.youtube.com/watch?v=0Qu_quKd_Sw

Link to comment
Share on other sites

Replace the helmet.

You're only throwing good money after bad.

Just because the helmet might look good after it's makeover, doesn't mean it will do it's job.

Protect your pip with a new helmet.

 

Just waiting for someone to spell it as 'helmut'

Link to comment
Share on other sites

If you don't need anything special and it's a single colour (You can mask etc for more colours) try Plastidip, Rustoleum Flexidip, Glue Devil Second Skin, Duplicolor Custom Wrap etc.

 

They are all those peel off coatings. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout