Jump to content

Steady Spin

Members
  • Posts

    1906
  • Joined

  • Last visited

Everything posted by Steady Spin

  1. True story. Don’t fix what isn’t broken.
  2. No stress. I’ve been tinkering like a mofo this week though 😂
  3. I don’t tinker to the level of causing more headaches though. Keep my bike clean and drivetrain maintained. Wheel bearings only done now after about 18 months and 6000km. I blame cheap bearings from the factory Fiance’s bike eats a set of bearings every 12 months. If the seatpost creaks I clean and replace the fibergrip. Same with the bars. Headset clean and regrease happens when the fork is serviced. So twice a year basically. BB service happens when the chainring gets replaced. I’ve never needed to replace BB bearings in my life. Lucky I guess. I really miss Hope hubs though. Never needed maintenance and just kept going and going on my Morewood. The new owner has the same experience I’m sure. So yeah. Until recently I mostly just clean the bike twice a month and lube at the same time.
  4. No microspline driver available for my hub unfortunately.
  5. Regular maintenance done as well as inspection on the prawls etc. Only the outer bearings were replaced recently. Will get the inners done as well. XD driver is on the cards for later but might be needed sooner. If so I can sell the NX cassette and go for a Garbaruk
  6. Looks like a 10mm as well
  7. Who insures your car and household?
  8. Isolated the clunk to my rear wheel. Switched wheels with the lady and it made the noise on her bike. Sounds almost dead on in the middle of the cassette so I’m suspecting a freewheel that is dying or the inner bearings being the culprits.
  9. Happy to help!
  10. Very good choice of bike there.
  11. Im home all day. Based in Centurion. DM me your contact number and we can chat quick
  12. Where are you based? I have an entire M7100 for you for spares.
  13. I thought I recognised you. Going trough the poplar forest is getting very bad and so is John’s trail. I did a quick 10k to test. First part of #2 and then onto #3 through BRB and then the last 10km but skipping John’s Trail. Finish just after the first half of Hallelujah.
  14. Wont make me feel the click through my pedals and will creak differently. Had that problem before and it easy to identify by flexing the saddle with your hands. Also won’t click when standing.
  15. Thanks Mr Dips. I did the axle surgery today. Degrease axle. Used Park Tool ASC on the threads, Polylube on the shaft, and fibergrip on any surface where metal meets carbon. Did the same for the derailleur hanger. I’m dreaming maybe but it sounded like it clicked less on the ride. Less angry. Tomorrow I’ll do some work on the dropper post and saddle. Highly doubt it is there since I can feel the click through the pedals. (not the pedals, tried a different set) Then… swopping wheels with the Stumpjumper to rule out my entire wheel.
  16. If he works off-shore or wants to buy it as a surprise for a family member then walk away.
  17. I’m going to try and rig a gopro to it pointing at the rear wheel. Maybe that will pick it up.
  18. Noted But in all seriousness, never pay anyone either unless you have undeniable proof that the item exists and vice versa.
  19. SRAM crank? Thru axle
  20. I will ride it until whatever clicks breaks and then replace it. Gatvol. Ps. Who is the best mechanic in the north of GP? Centurion, PTA area.
  21. Well, just stripped the rear end and relubed and torqued the axles, hanger, and stripped and cleaned the derailleur including a thorough inspection. Trails are a bit soggy so Ill do a road test later.
  22. Looks like the hanger can be the culprit as well. Painting the bike with a grease brush later.
  23. Had the discectomy done. Recovery was about 6 months of no mountain biking. after that I was on a road bike for a couple of months. This was in April 2014. 7+ years later and I’m still going strong. Hard rides with lots of drops and jumps. Top tip. Don’t skimp on rest and physio / biokinetics. Build your core as strong as possible.
  24. All the best. I’ve been there and it required an op to sort out. Try https://www.stretchingsa.co.za. Lots of guys here highly recommend them.
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout