porqui

Safe as houses - just be courteous and aware of walkers especially during this season.

Leave it !! Makes it authentic.

You would be hairless if you were wearing one. For sure no doubt about it.

So unless you have converted back into hard currency and in the bank you have not made a cent - you have just had expenditure ??

Dirt*girl still owes us some pictures - waiting in anticipation.

Time for development pilots hey !? You know the saying - pay them peanuts ......

Yep !!

Epoxy Pratley make a product that is brilliant (can't find it on their site - self levelling epocy)

Don't really care who it was - don't ride me off the trail.

Got ridden off the trail at Eselfontein stage race last weekend by two electrics so I'm pretty miffed about e-bikes. Keep them off the trail at an event. No place for them.

WOW !! 1st stage race 1st night race 1st Esel outing Really enjoyed it but the fitness level was not there (pity)

Ja swaer French Press not Vrystaat Press I know Parys is in the Vrystaat but this is chicory not coffee. .

ABSOLUTELY DO NOT click on the link DO NOT ENTER !!!

I make my own but make one of dark wood and one of a lighter wood - gives contrast.

Just remember the strength is in the width (114mm etc.) of the wood more than the thickness (50mm) of the timber. So you want to go wider rather than thicker. Have a good look at the previous table.

I'm going to get roasted here but I think you need a structural engineer to have a look at your design (please) just for piece of mind. Think you might be a bit on the light side. When you put the sheeting on the purlins I suggest you use fasteners with a proper thread and not nails as nails tend to go loose when nailed into green wood and the wood dries. I also cut lumber from trees - have a Lucas Mill

Try Airton Timber especially the Retreat branch.

It starts at the 1st ront. You cannot send yourself a gift from overseas.

Short block - not on a wide base - you can't keep it securely in place. Fingers very close to a very large blade - if that blade hooks that block your hand will be pulled into that blade. It's not just going to take one finger. That machine was not made for that job. In fact cutting dado's on a cut-off saw is not a safe operation either. Use a table saw with a sleigh. There are plenty of things on YouTube I would never DO !!

Here you go https://racetotherock2017.maprogress.com/?embed=yes#

Seriously BAD idea ! I have the Makita saw which is a great machine but I would NEVER do that on the saw.

If you are not following Benky you ARE missing out !!

My fine line of fear is 9mm.

Sometimes the changing colour of wood is due to oxidation. Emboya has a beautiful colour when planed but it changes within 1/2hour.

Nope math is actually the correct one the "s" is an SA thing