Tubeless Posted January 27, 2014 Share If you see thorns in your tyre, do you leave them in or take them out? (MTB) Link to comment Share on other sites More sharing options...
Pieter1 Posted January 27, 2014 Share I leave them in. Pulled one out once, had to plug the hole. Link to comment Share on other sites More sharing options...
Bobbo_SA Posted January 27, 2014 Share I'd rather remove and plug it a home than risk it pulling out on a ride. Most of the time the stans will seal it if you rotate the hole to the bottom for a minute or 2 Dustbin Dog and arendoog 2 Link to comment Share on other sites More sharing options...
Cranky Posted January 27, 2014 Share I rode a whole race with a big fever tree thorn in my front tyre. Rather disconcerting but no problem. When I pulled it out at the end I had major problems stopping the leak. Link to comment Share on other sites More sharing options...
SimpleDom Posted January 27, 2014 Share Cut it off and leave it in there! Capricorn, Dominik, Stefan Cremer and 1 other 4 Link to comment Share on other sites More sharing options...
rouxtjie Posted January 27, 2014 Share Pull em out, unless it's on a ride, then leave em. Think of them as sealant level indicators...kind of a blessing in disguise Cassie and Dustbin Dog 2 Link to comment Share on other sites More sharing options...
Stefan Cremer Posted January 27, 2014 Share I don't bother pulling them out on my training tyres, they're natural plugs. Link to comment Share on other sites More sharing options...
kosmonooit Posted January 27, 2014 Share Whatever ... but just remember to scan for thorns before putting that emergency tube in. BarHugger and arendoog 2 Link to comment Share on other sites More sharing options...
Capricorn Posted January 27, 2014 Share thorns are like knife blades, and with a stabbing, pulling the knife out without the proper tools around results in a loss of blood. Same with sealant. I try and break it off, or just leave it there and let the rolling break it off.Fact is, the hole is smaller, plugged by the thorn, and less air pressure and sealant is lost in the process. Simple knifing 101 folks Edited January 27, 2014 by Capricorn Cassie 1 Link to comment Share on other sites More sharing options...
Sniffie Posted January 27, 2014 Share Leave them. If I had to pull out every thorn and duwweltjie after every ride... eish! Lots of duwweltjies between the maize fields and in the veld. Link to comment Share on other sites More sharing options...
BarHugger Posted January 27, 2014 Share ......just to be clear about this topic, is this what's being referred to as thorns? Link to comment Share on other sites More sharing options...
Tubeless Posted January 27, 2014 Share No.......... the small groundcover thingy with the yellow flower. (dubbeltjie) http://www.ispot.org.za/node/227446?nav=related Link to comment Share on other sites More sharing options...
BarHugger Posted January 27, 2014 Share No.......... the small groundcover thingy with the yellow flower. (dubbeltjie) http://www.ispot.org...446?nav=related D'OH!!!!......again an asshubtion from my side......sorry people, nothing to contribute. Edited January 28, 2014 by BarHugger Link to comment Share on other sites More sharing options...
Pieter1 Posted January 27, 2014 Share No.......... the small groundcover thingy with the yellow flower. (dubbeltjie) http://www.ispot.org.za/node/227446?nav=relatedThose eventually work themselves out. Link to comment Share on other sites More sharing options...
scotty Posted January 28, 2014 Share On the ride i leave them in, once i'm finished i remove them and if lots of bleeding top up. I wont have time during a ride to remove every single thorn from my tire if i need to fit a tube. Link to comment Share on other sites More sharing options...
Cassie Posted January 28, 2014 Share thorns are like knife blades, and with a stabbing, pulling the knife out without the proper tools around results in a loss of blood. Same with sealant. I try and break it off, or just leave it there and let the rolling break it off.Fact is, the hole is smaller, plugged by the thorn, and less air pressure and sealant is lost in the process. Simple knifing 101 folks spoken like a true Capie!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now