Single speed chain ring bolts?

[bikebefok]

Where do you lot buy yours? Just need some inoffensive silver alloy ones to fit into an old gipiemme crank. Or do I just file down the old ones?

[Chro Mo]

http://www.rapide.co.za/pRAPIDE%20SINGLE%20CHAINRING%20BOLT%20SET/Rapide-Single-Chainring-Bolt-Set.aspx#.UxcKbPmSzJ

 

hubber kiwi sells them.

 

good luck

[shaper]

most LBS should have else can order for you

[bikebefok]

http://www.rapide.co...spx#.UxcKbPmSzJ

 

hubber kiwi sells them.

 

good luck

 

Black though, appreciate the response

[braailegend]

Or just add some washers to old bolt (at the back) if you dont want washers to be seen

[Flowta]

most LBS should have else can order for you

 

Never been into ANY bike shop that has chainring bolts for single chain ring setups.

 

They have packs of standard ones.

 

ONE shop managed to find some in their spares boxes, and those they had ground down themselves. (They do a lot of SS builds)

According to the shop. their suppliers just say to them "We're waiting for some to come" and then they don't hear back.

[shaper]

Never been into ANY bike shop that has chainring bolts for single chain ring setups.

 

They have packs of standard ones.

 

ONE shop managed to find some in their spares boxes, and those they had ground down themselves. (They do a lot of SS builds)

According to the shop. their suppliers just say to them "We're waiting for some to come" and then they don't hear back.

must be lucky as Solomons in woodmead do and they will also order short chainring bolts and take a day to get them

[Flowta]

Or just add some washers to old bolt (at the back) if you dont want washers to be seen

 

8mm ID washers do the trick. Though the OD of the ones you get in packs at the hardware store, etc. are too big (at least for an MTB setup).

 

Same bike shop happened to have a set of spacers like below that came with a set of SRAM chainring bolts

http://i.ebayimg.com/00/s/OTA2WDEyMDA=/z/dAYAAOxyVLNS3kL6/$_57.JPG

[Jewbacca]

Never been into ANY bike shop that has chainring bolts for single chain ring setups.

 

They have packs of standard ones.

 

ONE shop managed to find some in their spares boxes, and those they had ground down themselves. (They do a lot of SS builds)

According to the shop. their suppliers just say to them "We're waiting for some to come" and then they don't hear back.

 

True Story....

[Flowta]

must be lucky as Solomons in woodmead do and they will also order short chainring bolts and take a day to get them

 

Maybe it's just in Cape Town.

 

Been told upteen times on thehubsa to go get track bolts from my LBS but nobody has.

 

Also derailleur hanger bolts work too. But again, nobody has any spare, only with hangers.

[Flowta]

True Story....

 

LOL...Thanks for sorting me out

[braailegend]

8mm ID washers do the trick. Though the OD of the ones you get in packs at the hardware store, etc. are too big (at least for an MTB setup).

 

Same bike shop happened to have a set of spacers like below that came with a set of SRAM chainring bolts

 

 

I have the normal hardware store ones on my SLX crank

 

[Flowta]

8mm ID washers do the trick. Though the OD of the ones you get in packs at the hardware store, etc. are too big (at least for an MTB setup).

 

Same bike shop happened to have a set of spacers like below that came with a set of SRAM chainring bolts

http://i.ebayimg.com/00/s/OTA2WDEyMDA=/z/dAYAAOxyVLNS3kL6/$_57.JPG

 

Sorry, think they are 10mm

[Wil6]

I used some spring washers on the inside of the bolt like braailegend said

[dirtrider]

Got some very nice Alu ones from Accorn fasteners . They are such a perfect fit that you don't even see them .

[Iron]

Any Shimano 2 X 10 chainring bolts will work