Monark Posted August 17, 2016 Posted August 17, 2016 On 8/17/2016 at 8:52 AM, papa roach said: BFE . that pic does not do the bike justice.... come on show us the money shot...
BaGearA Posted August 17, 2016 Posted August 17, 2016 On 8/17/2016 at 8:52 AM, papa roach said: BFE .26? or the new 650B?
dimsum Posted October 25, 2016 Posted October 25, 2016 Anyone know of anyone selling a Cotic bFe medium frame?
The expat cyclist Posted October 25, 2016 Posted October 25, 2016 I have a Cotic issue at the moment. Recently I noticed that the clearance between the rear tyre and the left chainstay (non drive side) is a lot smaller than the clearance on the right (drive side). Roughly about 4-6mm. The tyre is not rubbing against the frame (except if it gets muddy) and the inside clearance between the dropouts is 135mm on the dot. Dropouts are also in line. I would like to know if this is just on my bike?Anywhere I can take it that can do cold setting maybe? - Frame is out of warranty. Or should I just leave it?
BaGearA Posted October 25, 2016 Posted October 25, 2016 On 10/25/2016 at 1:43 PM, The real MJ said: I have a Cotic issue at the moment. Recently I noticed that the clearance between the rear tyre and the left chainstay (non drive side) is a lot smaller than the clearance on the right (drive side). Roughly about 4-6mm. The tyre is not rubbing against the frame (except if it gets muddy) and the inside clearance between the dropouts is 135mm on the dot. Dropouts are also in line. I would like to know if this is just on my bike?Anywhere I can take it that can do cold setting maybe? - Frame is out of warranty. Or should I just leave it?Which model? photo please , of whole bike and tyre clearnce
Ryanpmb Posted October 25, 2016 Posted October 25, 2016 On 10/25/2016 at 1:43 PM, The real MJ said: I have a Cotic issue at the moment. Recently I noticed that the clearance between the rear tyre and the left chainstay (non drive side) is a lot smaller than the clearance on the right (drive side). Roughly about 4-6mm. The tyre is not rubbing against the frame (except if it gets muddy) and the inside clearance between the dropouts is 135mm on the dot. Dropouts are also in line. I would like to know if this is just on my bike?Anywhere I can take it that can do cold setting maybe? - Frame is out of warranty. Or should I just leave it?The most obvious problem to me would be an incorrectly dished wheel as opposed to a badly aligned frame. Hairy, BaGearA, Audible Anarchy and 2 others 5
the nerd Posted October 26, 2016 Posted October 26, 2016 On 10/25/2016 at 7:44 PM, Ryanpmb said: The most obvious problem to me would be an incorrectly dished wheel as opposed to a badly aligned frame. Thats the first thing I thought of, chances are slim that frame is misaligned...
V12man Posted October 26, 2016 Posted October 26, 2016 On 10/25/2016 at 1:43 PM, The real MJ said: I have a Cotic issue at the moment. Recently I noticed that the clearance between the rear tyre and the left chainstay (non drive side) is a lot smaller than the clearance on the right (drive side). Roughly about 4-6mm. The tyre is not rubbing against the frame (except if it gets muddy) and the inside clearance between the dropouts is 135mm on the dot. Dropouts are also in line. I would like to know if this is just on my bike?Anywhere I can take it that can do cold setting maybe? - Frame is out of warranty. Or should I just leave it?Take the wheel to Anton at Summit cycles in midrand and ask him to check the dishing - and if it's wrong, to fix it - it's far more likely to be the wheel than the frame.
The expat cyclist Posted October 26, 2016 Posted October 26, 2016 To answer all the questions:1. Solaris - 2013 frame2. I had the wheel checked for the dish and it was fine. However, the tyre was still on so I shall do it properly with the tyre off. Would really be disappointed if it is the wheel. I'll keep you posted.
The expat cyclist Posted November 2, 2016 Posted November 2, 2016 Ok so the wheel is fine...I think.Basic check was this: Took the casette off and put the wheel in the wrong way round. The gap between the tyre and the drive side was the same as before, ergo dish of wheel is fine.I need to take pictures of the gaps but what is a normal gap aon a cotic solaris with 2.25 tyres?
Grey Hubs Posted November 4, 2016 Posted November 4, 2016 On 11/2/2016 at 10:10 AM, The real MJ said: Ok so the wheel is fine...I think.Basic check was this: Took the casette off and put the wheel in the wrong way round. The gap between the tyre and the drive side was the same as before, ergo dish of wheel is fine.I need to take pictures of the gaps but what is a normal gap aon a cotic solaris with 2.25 tyres?I looked at my Solaris last night. I have a narrow 2.0 WTB on the back, but it seems pretty well centered.
BaGearA Posted November 4, 2016 Posted November 4, 2016 If its not an immediate problem just ride the bike
BaGearA Posted November 15, 2016 Posted November 15, 2016 On 11/15/2016 at 12:28 PM, The real MJ said: This could be the reason...Email cotic , assuming you still have your warranty?
V12man Posted November 15, 2016 Posted November 15, 2016 On 11/15/2016 at 12:28 PM, The real MJ said: This could be the reason...Oops.... time to call Matt.... that definitely looks wrong
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now