Balooba Posted May 11, 2017 Author Posted May 11, 2017 So a new hub then? Thanks for the advice. Will swing by my LBS on the weekend.
BaGearA Posted May 11, 2017 Posted May 11, 2017 Also, what about pawls that suffer from premature engagement?Between can't and even ; i can't even
PregoRoll Posted May 11, 2017 Posted May 11, 2017 The problem is not the size of the Pawl, but how they are being used bow chika bow wow!Since when are we using Phrasing again Savage?
Pure Savage Posted May 11, 2017 Posted May 11, 2017 So a new hub then? Thanks for the advice. Will swing by my LBS on the weekend.Sounds like it
PregoRoll Posted May 11, 2017 Posted May 11, 2017 So a new hub then? Thanks for the advice. Will swing by my LBS on the weekend.May just need a strip down and clean. you never know. See what your LBS Says. Or bring it to me
myveonix Posted May 12, 2017 Posted May 12, 2017 Where's Dave? Always enjoy [and appreciate] his wisdom.
Mamil Posted May 12, 2017 Posted May 12, 2017 Let's not confuse Oom Pawl with the pole measuring that goes on in this free hub. Don't mslead the OP - with a bit of spit and pawlish his bike will be fine.
Balooba Posted May 16, 2017 Author Posted May 16, 2017 Since nobody's asked yet... What hub? Writing exams so banned myself from the hub... No do not kill me but this is a Circus Monkey hub. Bought a wheel set from a fellow hubber. These hubs are not well know here but more in Australia and the States.
karlito Posted May 16, 2017 Posted May 16, 2017 Back when I started working on my own bike I decided to service my freehub, without really knowing what i was doing. Never use grease on your pawls, only light oil! I learned the hard way that grease is too think so the pawls don't engage properly. Completely stuffed up my freehub on the first big technical climb.
droo Posted May 16, 2017 Posted May 16, 2017 Writing exams so banned myself from the hub... No do not kill me but this is a Circus Monkey hub. Bought a wheel set from a fellow hubber. These hubs are not well know here but more in Australia and the States. You should be able to get a new driver then, which will be well cheaper than a new hub and wheel rebuild. But you'll have to look online cos I don't think there are any local dealers. Once you've got the part, fitting should be a pretty simple matter.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.