Jump to content

Front brake bolt to short


Furbz

Recommended Posts

Posted

So i have an odd problem.

the bolt that slides through the fork to mount my front brake is to short.

 

i've tried cyclelab without luck.

 

anyone know where i can find a longer front brake bolt?

 

this is for a standard brake. 

 

so something like this

41jUn-2iqWL._SY300_.jpg

 

thanks in advance!

 

Posted

Is it too long by alot or by a cm? maybe you can make use of some washers or an extra nut

Uhmmm, he said too short Eddy.  Pay attention now...

Posted

Just a question. Is not possible that the front and back bolt have been swapped around, as if I remember correctly the back one is shorter than the front? 

 

The back one is much shorter than the front one so I doubt that the front bolt would work on the back brake.

Posted

I find it strange that a shop as big as Cyclelab don't have spares in a box somewhere.

 

I got some from a bike shop in PE. They just went to the workshop and came back with a shoe box full.

Cyclelab service department is rather shocking. They barely carry any spares.

 

I went to a store on Sunday to try and get a spacer put in my cassette and was told I have to buy a whole new cassette to get the spacer :thumbdown: . 

 

And that is the last time I try their service department.

Posted

Seems smaller stores generally have larger spares boxes, and a larger appetite to assist.

That said, sometimes it's just the person behind the counter who is unwilling to assist rather than the store.

Posted

Seems smaller stores generally have larger spares boxes, and a larger appetite to assist.

That said, sometimes it's just the person behind the counter who is unwilling to assist rather than the store.

 

Cyclelab did try, got a tray of spares. just none the length i needed

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout