BaGearA Posted September 15, 2020 Share GHi guys Looooong shot here but I'm looking for A 30.9 Spez seatpost that can accommodate 7x9mm rails (carbon) Best option at the local spez store is R3500 Or any other seatpost(30.9mm or 31.6mm) that can safely clamp 7x9mm carbon rails Please spread the word I finally found my dream saddle after more than a year of hunting Link to comment Share on other sites More sharing options...
Graham W Posted September 15, 2020 Share GHi guys Looooong shot here but I'm looking for A 30.9 Spez seatpost that can accommodate 7x9mm rails (carbon) Best option at the local spez store is R3500 Or any other seatpost(30.9mm or 31.6mm) that can safely clamp 7x9mm carbon rails Please spread the word I finally found my dream saddle after more than a year of hunting Link to comment Share on other sites More sharing options...
Graham W Posted September 15, 2020 Share Hi if you have a spez seat post with the tension bolt going through the seat clamp left to right then I might be able to help I swapped one out for alloy clamps Link to comment Share on other sites More sharing options...
BaGearA Posted September 15, 2020 Share Hi if you have a spez seat post with the tension bolt going through the seat clamp left to right then I might be able to help I swapped one out for alloy clampsPm'd you Link to comment Share on other sites More sharing options...
Graham W Posted September 15, 2020 Share Seems to be a problem opening the link pm on Edited September 15, 2020 by Graham W Link to comment Share on other sites More sharing options...
NeverNotRolling Posted September 16, 2020 Share Been looking for a straight steerer air fork for ages but no luck. If anyone has one laying around and wants something for it, please let me know. Link to comment Share on other sites More sharing options...
Shwetty Posted September 17, 2020 Share Looking for the B-axle assembly for an Ultegra 6800 rear derailleur. If anyone has an old 'broken' derailleur that could be stripped for the part I'm after, please let me know. Link to comment Share on other sites More sharing options...
Skylark Posted September 20, 2020 Share Does anyone have a 9spd mtb cassette that will take a 75% chain? Link to comment Share on other sites More sharing options...
BaGearA Posted September 21, 2020 Share As mentioned above Graham very graciously helped me out with a clamp but I still need a seatpost I'm looking for the post pictureed below Preferably the alloy one, my local store only has the carbon one and it's absurd Fully willing to pay beg borrow and cut your Gras Please pm me if you ha e one or maybe know of someone that has one Link to comment Share on other sites More sharing options...
marshace Posted September 21, 2020 Share Does anyone have a 9spd mtb cassette that will take a 75% chain?Yes I do have various 9 spd sprockets at various degrees of wear...Where are you based ? I am in Brackenfell.ThxEric Skylark 1 Link to comment Share on other sites More sharing options...
Daniel De Vynck Posted September 21, 2020 Share Hi, does anyone have a set of slip on knee pads? not the ones with straps. Link to comment Share on other sites More sharing options...
ridr Posted October 11, 2020 Share Looking for a SRAM mtb shifter clamp for my 11 speed GX shifter (thought I had a few in my box of bike things, but must have given them away a while ago). I don't mind the one in the image or the hinged matchmaker type. Edited October 11, 2020 by ridr Link to comment Share on other sites More sharing options...
Alouette3 Posted October 23, 2020 Share Looking for a left side Problemsolver Mismatch 1.1 Shimano i-Spec B brakes to Sram style shifter. With all the x1 conversions, someone must have in the bottom of their tool box? If all else fails, I'll go the 3D printed route Link to comment Share on other sites More sharing options...
PSYCHOsmurfZA Posted October 29, 2020 Share Trying my luck here, i have a set of rims i would like to convert from bolt axle to quick release, if anyone has an old set lying around im willing to purchase it from you. Thank you Link to comment Share on other sites More sharing options...
Muzzarati Posted October 29, 2020 Share Hi I'm looking for an old 26" v-brake frame and fork. Link to comment Share on other sites More sharing options...
Chadvdw67 Posted November 5, 2020 Share Anybody possibly have some Shimano M7000/8000/9000 brake levers that are leaking and you are not using? Willing to buy them for a reasonable price Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now