Farrnus Posted May 16, 2020 Share Nice build! Roguemeister and Wayne pudding Mol 2 Link to comment Share on other sites More sharing options...
Shebeen Posted March 18, 2021 Share finally building my frame up.. but this flat/post mount issue for the front caliper, sjoe was hoping it would be easier by now. have got a nice shimano road disc groupo, so need the adaptor on the forkam looking at getting one of thesehttps://bikehub.co.za/classifieds/item/mountain-bike-brakes/1641/flat-mount-brake-to-post-mount-frame or just get a 2nd hand shimano mtb caliper any other suggestions? Link to comment Share on other sites More sharing options...
splat Posted March 18, 2021 Share finally building my frame up.. but this flat/post mount issue for the front caliper, sjoe was hoping it would be easier by now. have got a nice shimano road disc groupo, so need the adaptor on the forkam looking at getting one of thesehttps://bikehub.co.za/classifieds/item/mountain-bike-brakes/1641/flat-mount-brake-to-post-mount-frame or just get a 2nd hand shimano mtb caliper any other suggestions? https://bikehub.co.za/classifieds/item/mountain-bike-brakes/460502/shimano-xt-hydraulic-brake-caliper https://bikehub.co.za/classifieds/item/road-bike-brakes/3064/shimano-disc-brake-caliper I was dabbling with these thoughts, but got all confused about compatibility between levers, hydraulic lines and connections and the callipers. I didn't follow through in the end, so can't offer any insight. The most simple would be that adapter, but its not the most beautiful solution. Link to comment Share on other sites More sharing options...
Grease_Monkey Posted March 18, 2021 Share finally building my frame up.. but this flat/post mount issue for the front caliper, sjoe was hoping it would be easier by now. have got a nice shimano road disc groupo, so need the adaptor on the forkam looking at getting one of thesehttps://bikehub.co.za/classifieds/item/mountain-bike-brakes/1641/flat-mount-brake-to-post-mount-frame or just get a 2nd hand shimano mtb caliper any other suggestions?I went through the same exercise. I bought a flat mount groupo and 1 2nd hand mtb caliper. Worked a treat (all Shimano). I could not find an adapter anywhere. Actually still have the whole groupset in my spares bin. Link to comment Share on other sites More sharing options...
Shebeen Posted March 19, 2021 Share https://bikehub.co.za/classifieds/item/mountain-bike-brakes/460502/shimano-xt-hydraulic-brake-caliper https://bikehub.co.za/classifieds/item/road-bike-brakes/3064/shimano-disc-brake-caliper I was dabbling with these thoughts, but got all confused about compatibility between levers, hydraulic lines and connections and the callipers. I didn't follow through in the end, so can't offer any insight. The most simple would be that adapter, but its not the most beautiful solution.i think I'm going with the just get a post mount caliper. the adaptor looks agricultural and i will then have a spare caliper thankfully the 2nd link was just uploaded and is exactly what i need. send a please sell it to me message already Link to comment Share on other sites More sharing options...
Farrnus Posted March 19, 2021 Share Hi Guys, for the Front Brakes, you would need a Post Mount Caliper. These are readily ( or were ) from Cape Cycle Systems ( importers of SRAM in South Africa ) here is an example :https://www.capecycles.co.za/sram-road/shifters_brakes/shifters_brakes/007018144000-sram-rival22-hrd-f-shift-f-brake they might also do/have for APEX which is 1 level lower spec and price. the Adaptor you need is an IS to POST MOUNT Adaptor - these are very common. CWC have -https://www.cwcycles.co.za/product/response-caliper-mount-f160r140 Unfortunately in the way of Gravel and Bigger Tyre Clearance - the options in Cromo or even Carbon Forks with FLATMOUNT are limited - even in 2021. Edited March 19, 2021 by Farrnus Link to comment Share on other sites More sharing options...
Grease_Monkey Posted March 19, 2021 Share Hi Guys, for the Front Brakes, you would need a Post Mount Caliper. These are readily ( or were ) from Cape Cycle Systems ( importers of SRAM in South Africa ) here is an example :https://www.capecycles.co.za/sram-road/shifters_brakes/shifters_brakes/007018144000-sram-rival22-hrd-f-shift-f-brake they might also do/have for APEX which is 1 level lower spec and price. the Adaptor you need is an IS to POST MOUNT Adaptor - these are very common. CWC have -https://www.cwcycles.co.za/product/response-caliper-mount-f160r140 Unfortunately in the way of Gravel and Bigger Tyre Clearance - the options in Cromo or even Carbon Forks with FLATMOUNT are limited - even in 2021. Problem is that the frame and fork have different mounts - flat and post. Road and gravel group sets are sold as a pair, mostly flat these days. You cannot mount a flat mount caliper to a post mount frame or fork (no adapters available that aren't custom made). So you have to buy a group set with post mount calipers and find an adapter to get the post mount caliper on the flat mount frame (hens teeth - possibly sell them with your frames). And like I mentioned, most gravel or road group sets are sold with flat mount calipers anyway, so finding a group set like that is a challenge to begin with.. So then you have to buy a separate post mount caliper - a bit annoying when you have just bought a new groups set. It slowed my build down massively, I know the same with other guys. The frame and fork needs to be the same standard, or at the very least include an adapter for the flat mount frame. Link to comment Share on other sites More sharing options...
Shebeen Posted March 19, 2021 Share Hi Guys, for the Front Brakes, you would need a Post Mount Caliper. These are readily ( or were ) from Cape Cycle Systems ( importers of SRAM in South Africa ) here is an example :https://www.capecycles.co.za/sram-road/shifters_brakes/shifters_brakes/007018144000-sram-rival22-hrd-f-shift-f-brake they might also do/have for APEX which is 1 level lower spec and price. the Adaptor you need is an IS to POST MOUNT Adaptor - these are very common. CWC have -https://www.cwcycles.co.za/product/response-caliper-mount-f160r140 Unfortunately in the way of Gravel and Bigger Tyre Clearance - the options in Cromo or even Carbon Forks with FLATMOUNT are limited - even in 2021. Baie dankie oom Farrnus, but you're confusing my silly little brain further - that adaptor has a 90' shift in it which doesn't make sense to me. I'm asking for only front brake, using the supplied Farr chromo fork.that's post mount correct?Fork Spec : 411mm Axle to Crown Length, 100 x 15 with 1.5mm Pitch, Post Mount Brakeso your options there are:Post mount (as you linked to) with no adaptor (unless you want different rotor sizes) or flat mount using an adaptorlike so (yes this is a rear pic but same principle) - https://www.assolutions.ca/flat-mount-caliper-to-post-mount-frame-photos/ I can understand this is not how you would have ideally planned it, but hey I'm learning stuff here! Edited March 19, 2021 by Shebeen Link to comment Share on other sites More sharing options...
Shebeen Posted March 19, 2021 Share ALSO, whilst we have this thread on the front page - please post more pics of your builds guys!! Link to comment Share on other sites More sharing options...
Grease_Monkey Posted March 19, 2021 Share Baie dankie oom Farrnus, but you're confusing my silly little brain further - that adaptor has a 90' shift in it which doesn't make sense to me. I'm asking for only front brake, using the supplied Farr chromo fork.that's post mount correct? so your options there are:Post mount (as you linked to) with no adaptor (unless you want different rotor sizes) or flat mount using an adaptorlike so (yes this is a rear pic but same principle) - https://www.assolutions.ca/flat-mount-caliper-to-post-mount-frame-photos/ I can understand this is not how you would have ideally planned it, but hey I'm learning stuff here! Front brake is post mount. You will not find an adapter to get a flat mount brake to work with it unless you have it machined or if you import from the US at huge costs. You need a post mount caliper. Link to comment Share on other sites More sharing options...
Shebeen Posted March 19, 2021 Share Front brake is post mount. You will not find an adapter to get a flat mount brake to work with it unless you have it machined or if you import from the US at huge costs. You need a post mount caliper. my question was more on why this adaptor would be needed anywhere? the Adaptor you need is an IS to POST MOUNT Adaptor - these are very common. CWC have -https://www.cwcycles.co.za/product/response-caliper-mount-f160r140 Link to comment Share on other sites More sharing options...
Grease_Monkey Posted March 19, 2021 Share my question was more on why this adaptor would be needed anywhere? That is an IS adapter. That will not help you on the Farr frame at all. You need one of these: https://glorycycles.com/shimano-post-mount-caliper-to-flat-mount-frame-converter/ Dunno why Farrnus is recommending that? Edited March 19, 2021 by Grease_Monkey Link to comment Share on other sites More sharing options...
Shebeen Posted March 19, 2021 Share That is an IS adapter. That will not help you on the Farr frame at all. You need one of these: https://glorycycles.com/shimano-post-mount-caliper-to-flat-mount-frame-converter/ Dunno why Farrnus is recommending that?ja i think he meant to suggest this one for the rear if you have post caliper https://www.cwcycles.co.za/product/shimano-flat-mount-adaptor-rear Link to comment Share on other sites More sharing options...
Schnavel Posted March 19, 2021 Share finally building my frame up.. but this flat/post mount issue for the front caliper, sjoe was hoping it would be easier by now. have got a nice shimano road disc groupo, so need the adaptor on the forkam looking at getting one of thesehttps://bikehub.co.za/classifieds/item/mountain-bike-brakes/1641/flat-mount-brake-to-post-mount-frame or just get a 2nd hand shimano mtb caliper any other suggestions? Those are your 2 options. I know the guy selling them, as well as the engineering works that was used to manufacture them - you won't go wrong with the adaptor. Link to comment Share on other sites More sharing options...
andreas17777 Posted March 19, 2021 Share Here is my Farr Gravel Bike. Super comfy and can basically ride anything with this. I made an adapter to fit the front calliper. I've changed the tyres since these weren't reliable. gerriemtb, splat and Wayne pudding Mol 3 Link to comment Share on other sites More sharing options...
Shebeen Posted April 29, 2021 Share Soooooo. in true N+1 fashion it only took me about 18 months to finally build up this bike.moving house inbetween is my excuse and i'm sticking to it. it came together in a combination of my own parts bin/bikehub classifieds alerts and a final order from rapide it actually worked. I've stripped and rebuilt bikes before, this is actually quite a bit more complex!Had a few last week gremlins trying to get brakes to work, so only actually got the bar tape on 11pm before Nova Eroica, first ride was to registration, saddle pitch got adjusted and then a maiden voyage of 95km of Langeberg grippy gravel followed with bliss. Verdict - some tweaks to be made, but this is going to be a LEKKER bike to ride ok finally done, let's ride! views for days Eroica do small things to make it special...like where we need to walk final pic spot on the ride, I'm pretty bushed here further exploring in the Garden route fanievb, Wayne pudding Mol, splat and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now