Jewbacca Posted July 13, 2022 Share I used a set of SLX calipers on my PM mini Velo. Came out beautifully. Fits fin pads too. Link to comment Share on other sites More sharing options...
splat Posted August 5, 2022 Share Wolf Tooth's version of the adapter requires less clearance than the AS Solutions one, but adds 20mm to your rotor size. (maybe some frames and forks dont have the 20mm clearance required by the AS Solutions product) https://bikerumor.com/wolf-tooth-post-to-flat-mount-adapter-puts-new-brakes-on-old-frames-forks/ Edited August 5, 2022 by splat KingZA and Mongoose! 2 Link to comment Share on other sites More sharing options...
JacoFerreira5 Posted August 5, 2022 Share On 7/5/2018 at 1:24 PM, Ki11gar said: Thanks @Schnavel. I have indeed been looking at this exact problem. I am sure I found the same guy that you did. Very impressive, I think I will follow your lead! Hi. Do you still make the adapters for 160mm rotors for flat mount? Regards Link to comment Share on other sites More sharing options...
Schnavel Posted August 5, 2022 Share On 7/5/2018 at 1:24 PM, Ki11gar said: Thanks @Schnavel. I have indeed been looking at this exact problem. I am sure I found the same guy that you did. Very impressive, I think I will follow your lead! Speak to @Ki11gar Link to comment Share on other sites More sharing options...
Ki11gar Posted August 5, 2022 Share Hello All I did make them but I have no stock, there is some hesitation about remaking them due to the effort I had to put in when fitting them to bikes. Each frame is a bit different and so needs some spacers underneath the mount, which I had to hand make for most people. I also couldn't guarantee that they would work for every frame so I started getting a lot heat back, one guy had to run a 180 with spacers because of the curves under the mounts on his fork. Very unhappy with me even though I spent my time looking at it not him, not even a full refund calmed him. ChrisF, Sid the Sloth and Kom 1 2 Link to comment Share on other sites More sharing options...
ichnusa Posted August 5, 2022 Share 2 minutes ago, Ki11gar said: Hello All I did make them but I have no stock, there is some hesitation about remaking them due to the effort I had to put in when fitting them to bikes. Each frame is a bit different and so needs some spacers underneath the mount, which I had to hand make for most people. I also couldn't guarantee that they would work for every frame so I started getting a lot heat back, one guy had to run a 180 with spacers because of the curves under the mounts on his fork. Very unhappy with me even though I spent my time looking at it not him, not even a full refund calmed him. Don’t mind him… forget and move on Link to comment Share on other sites More sharing options...
Jewbacca Posted August 5, 2022 Share Is it not worth the aero gainz headache to just swap out the flat mount calipers? I did it on one of my bikes. Just sold the flat mount ultegra calipers and fitted some PM calipers. It's less aero but it's also way less fiddly Sid the Sloth and Kom 2 Link to comment Share on other sites More sharing options...
MattDaniel Posted December 4, 2022 Share Anyone found a solution to this recently? Treated myself to a SRAM Rival groupset but unfortunately only comes as flat mount. Planning on putting this on my cannondale slate which has post mount on the Lefty Oliver. Have ordered the Wolf Tooth adapter in the UK, but with postal strikes happening that side, looking increasingly unlikely that I’ll get it any time soon. any local solutions worth looking into? Link to comment Share on other sites More sharing options...
100Tours Posted December 4, 2022 Share Buy this brake - swap out caliper. Mountain Bike Front Brake | Bike Hub Link to comment Share on other sites More sharing options...
MORNE Posted December 4, 2022 Share 1 hour ago, MattDaniel said: Anyone found a solution to this recently? Treated myself to a SRAM Rival groupset but unfortunately only comes as flat mount. Planning on putting this on my cannondale slate which has post mount on the Lefty Oliver. Have ordered the Wolf Tooth adapter in the UK, but with postal strikes happening that side, looking increasingly unlikely that I’ll get it any time soon. any local solutions worth looking into? Im sure you know but why UK? Was it s stock issue? Wolftooth sells and ships here direct. They use UPS so no post offices involved. I’ve bought from them a few times. They are in the US. https://www.wolftoothcomponents.com/products/post-to-flat-mount-brake-adapter edit: not to mention it is listed on paragontec’s site so any bikeshop can get it for you locally. Evo bikes stock wolftooth stuff so start by asking there. Here’s the link: https://www.paragontech.co.za/product/wolf-tooth-disc-brake-adaptor-post-to-flat-mount-pst-flt-brkadpt/ Edited December 4, 2022 by MORNE ChrisF 1 Link to comment Share on other sites More sharing options...
MattDaniel Posted December 5, 2022 Share 11 hours ago, MORNE said: Im sure you know but why UK? Was it s stock issue? Wolftooth sells and ships here direct. They use UPS so no post offices involved. I’ve bought from them a few times. They are in the US. https://www.wolftoothcomponents.com/products/post-to-flat-mount-brake-adapter edit: not to mention it is listed on paragontec’s site so any bikeshop can get it for you locally. Evo bikes stock wolftooth stuff so start by asking there. Here’s the link: https://www.paragontech.co.za/product/wolf-tooth-disc-brake-adaptor-post-to-flat-mount-pst-flt-brkadpt/ Thanks Morne, my brother is coming out from the uk for Xmas, so he was gonna bring it back for me. I found it on Paragontech.Co.ZA and tried speaking to a mechanic at CycleLab (assumed they may stock it or something similar due to their size) without any success, was told they’d never heard of anything like that. will definitely follow up with Evo Bikes now though, appreciate it! MORNE 1 Link to comment Share on other sites More sharing options...
MORNE Posted December 5, 2022 Share 15 minutes ago, MattDaniel said: Thanks Morne, my brother is coming out from the uk for Xmas, so he was gonna bring it back for me. I found it on Paragontech.Co.ZA and tried speaking to a mechanic at CycleLab (assumed they may stock it or something similar due to their size) without any success, was told they’d never heard of anything like that. will definitely follow up with Evo Bikes now though, appreciate it! That makes sense then. Also, caveat being that “any bikeshop” excludes numpties like cycle lab lol. Of course they didn't have a clue…because they generally don't when it comes to anything bicycle related 😅 Edited December 5, 2022 by MORNE Schnavel, ChrisF, splat and 1 other 4 Link to comment Share on other sites More sharing options...
Rowl Posted November 15, 2023 Share Reviving an old thread and looking for some help, to confirm whether I maybe missed something... Am I right in saying the Momsen GP300 also actually has a post mount front brake system similar to the Farr (and not a flat mount like specified on the website). Without thinking I ordered a flat mount ZRace brake system from Aliexpress, but trying to fit them to the GP doesn't work, apologies for the poor photo quality. The bike comes with TRP Spyre C mechanical brakes. I was thinking of ordering one of these Aliexpress adapters, as I can't seem to find anything local... Do you think the clearance will be sufficient? And an extra month or 2 is not going to cause it any heartache. ec5896cfc8c045e49213ae9887dab37c_printpdf.pdf Edited November 15, 2023 by Roul Updated photo Link to comment Share on other sites More sharing options...
warick_wrx Posted November 15, 2023 Share Did you consider using a bigger rotor , is that a 160mm ? Edited November 15, 2023 by warick_wrx Link to comment Share on other sites More sharing options...
Rowl Posted November 15, 2023 Share Jip it is a 160mm, do you think going to 180mm would make a difference? Link to comment Share on other sites More sharing options...
warick_wrx Posted November 15, 2023 Share 4 minutes ago, Roul said: Jip it is a 160mm, do you think going to 180mm would make a difference? Yes from the picture it looks as if a extra 20mm would solve the problem. Alternatively you can try souce the mount. Edited November 15, 2023 by warick_wrx Rowl 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now