Looking for solution: Bottle cage mount

[Kerchak]

Hi Hubbers

 

Looking for a bottle cage mount with a quick release. This is for a seatpost. Most mounts that I have seen needs a tool to disassemble which take time. The attachment to the seatpost should be quick and easy.

Some have a single ring, others a double ring for the top and bottoms screws. It has to be a single ring. An idea was to use a short QR quick release of a normal seatpost clamp and combine it with a single ring bottle cage mount. But I am struggling to find a QR and a single ring bottle cage that will work together.

 

Does somebody have a hack that they have deviced or is there something in the marketplace.

 

Thanks

[TCTG]

I haven't seen one either so curious to know if this hack exists. Is it because you want to quickly remove and install in another bike or is there another reason for QR unit?

[Kerchak]

I haven't seen one either so curious to know if this hack exists. Is it because you want to quickly remove and install in another bike or is there another reason for QR unit?

My bike's 2nd bottle cage is below the frame. Lot of mud. Most of my rides 1 bottel is enough. I prefer a clean seatpost without a saddle bag and permanent bottle cage. So, if I do need a 2nd bottle I want a quick option to put on and take off.

[Dexter-morgan]

Check out GCN youtube they had something magnetic that you twist off.

[shaper]

Maybe hack a gopro seatpost mount or something similar?

[Kerchak]

Check out GCN youtube they had something magnetic that you twist off.

Can work. Just a bit pricey $40

[hansolo]

Hi 

 

Could something like this work?

 

https://www.on-lynecomponents.com/collections/the-holy-rail/products/holy-rail-strap

 

Lyne suggests that you mount a holy rail and then your bottle.

 

Stupid question/solution, how often do you intend to remove the bottle cage? It's quite wastefull but cable ties could perhaps work...

[Kerchak]

Hi 

 

Could something like this work?

 

https://www.on-lynecomponents.com/collections/the-holy-rail/products/holy-rail-strap

 

Lyne suggests that you mount a holy rail and then your bottle.

 

Stupid question/solution, how often do you intend to remove the bottle cage? It's quite wastefull but cable ties could perhaps work...

That might work. Tx

 

Not that often. Maybe twice a month on very long rides

[PhilipV]

Of your frame is a hardtail then you can always use something like the Topeak versamount.

Or you can add the Fidlock twist system if you want the low profile look. Not cheap, but I don't think you are going to get a quick release system for little money.

https://fidlock-bike.us/

Or the Fabric Cageless bottle system.

https://fabric.cc/products/hydration/cageless-bottle-525ml-insulated/

[Kerchak]

Maybe hack a gopro seatpost mount or something similar?

In my search for gopro mounts I found this

https://www.zasttra.com/products/bicycle-motorcycle-holder-handlebar-mount-for-gopro-hero4-3-3-2-1-sjcam-sj4000-sj5000-sj6000-xiaoyiblack

 

I think I will be able to attach a bottle cage on it.

[Kerchak]

Of your frame is a hardtail then you can always use something like the Topeak versamount.

Or you can add the Fidlock twist system if you want the low profile look. Not cheap, but I don't think you are going to get a quick release system for little money. https://fidlock-bike.us/

Or the Fabric Cageless bottle system. https://fabric.cc/products/hydration/cageless-bottle-525ml-insulated/

The cageless is cool and look neat

[Kerchak]

Solution was under my nose the whole time.

Used my mount for the bike light. Still needs some work but will suffice for now.

[CAAD4]

My guess is if it's plastic, you will lose your bottle

[ChrisF]

My guess is if it's plastic, you will lose your bottle

Jip.

 

At least spread the load with two of those quick.release brackets ...

[Kerchak]

Jip.

At least spread the load with two of those quick.release brackets ...

Also thought so.

Trying do do something like this

https://www.sportsmanswarehouse.co.za/concept-30-9mm-bottle-seat-post-clamp-c1136740

[TCTG]

Also thought so.

Trying do do something like this

https://www.sportsmanswarehouse.co.za/concept-30-9mm-bottle-seat-post-clamp-c1136740

Thats not QR and will not work for his purpose.