Tyre height

[RogM]

Hi all

 

Please could someone with 700 x 32c, and 700 x 35c, on a 29er rim, please measure the tyre height from the rim (as per pic between the 2 red lines)?

 

 

I realise this may vary between brands and rims, but as an indication..

 

Thanks in advance

 

Rog

[Grubscrew]

Continental Speed King 700 x 35c tyres mounted on quite wide rims (25mm internal). Measures 37mm in height and 40mm in width.

[Vetplant]

Hi all

 

Please could someone with 700 x 32c, and 700 x 35c, on a 29er rim, please measure the tyre height from the rim (as per pic between the 2 red lines)?

 

Tyre_height.jpg

 

I realise this may vary between brands and rims, but as an indication..

 

Thanks in advance

 

Rog

Interesting that you ask that, I was looking for the same info as I am considering running my 26er Hardtail on 29er rims with gravel tyres as a commuting bike.

 

The clearances are gonna be close in my case with anything more than 32C tyres.

[RogM]

Continental Speed King 700 x 35c tyres mounted on quite wide rims (25mm internal). Measures 37mm in height and 40mm in width.

 

Thanks Grubscrew, will check it out shortly..

[RogM]

Interesting that you ask that, I was looking for the same info as I am considering running my 26er Hardtail on 29er rims with gravel tyres as a commuting bike.

 

The clearances are gonna be close in my case with anything more than 32C tyres.

 

If you do, please let me know height with the 32C

Shot!

[NotSoBigBen]

Hope that helps ....

 

700*35C on a 26" hardtail frame

[RogM]

Hope that helps ....

 

700*35C on a 26" hardtail frame

 

Thanks Ben, great info!!

[Capricorn]

Hi all

 

Please could someone with 700 x 32c, and 700 x 35c, on a 29er rim, please measure the tyre height from the rim (as per pic between the 2 red lines)?

 

Tyre_height.jpg

 

I realise this may vary between brands and rims, but as an indication..

 

Thanks in advance

 

Rog

any particular tyre pressure that the measurement needs to take place at?

[RogM]

any particular tyre pressure that the measurement needs to take place at?

 

At the pressure you would normally use for a hard surface..

 

Thanks Cap 

[Goodbadugly]

I can fit a 35c in a 26er hardtail frame. About 5mm of clearance. 40c too much. 

[Goodbadugly]

I have a Van Nicholas Zion 26er. Did not want to dump it when 26ers went out of fashion. I kept the MTB 3x10 gruppo, added a rigid fork and 29er wheels and enjoy. Ja, I still have a 600mm flat bar and bar ends

[Eddy Gordo]

Interesting. Wouldnt mind converting the marin nail trail to a gravel bike.

[Wayne pudding Mol]

Hope that helps ....

 

700*35C on a 26" hardtail frame

Geez this looks like fun