Jump to content

10x2 Tube


breaker

Recommended Posts

So my baby's pram's front wheel's valve has torn at the base.

I've been to 3 lbs and no one stocks a 10inch tube,

Any idea's where I could find one in cape town?

Thanx

Link to comment
Share on other sites

So my baby's pram's front wheel's valve has torn at the base.

I've been to 3 lbs and no one stocks a 10inch tube,

Any idea's where I could find one in cape town?

Thanx

 

To much wheel spin does that. Slow down!!!

Link to comment
Share on other sites

Bridge was one of them that I tried they suggested Wynberg Pharmacy which I'll be calling in due course.

You know I've told my 1 year old to inflate it to the correct psi and not to do any jumps, but does she listen ,just because it has disc brakes doesn't make it an AM Pram :D :D :D

Link to comment
Share on other sites

Bridge was one of them that I tried they suggested Wynberg Pharmacy which I'll be calling in due course.

You know I've told my 1 year old to inflate it to the correct psi and not to do any jumps, but does she listen ,just because it has disc brakes doesn't make it an AM Pram :D :D :D

 

Think it's time you go tubeless!!!

Some tubeless valves, rim tape and Stans should sort you out quick quick.

Link to comment
Share on other sites

Think it's time you go tubeless!!!

Some tubeless valves, rim tape and Stans should sort you out quick quick.

As long as it doesn't need more than 40psi it's probably not a bad idea...

Link to comment
Share on other sites

  • 2 years later...

It is scary when you google something and your own thread from 3 years ago pops up. :D  

So again I'm looking for a 10inch tube, last time I had to get it from the people who imported the pram from Germany, and they are in JHB.  :blink:

Any fresh ideas as to whom I can try in Cape Town.

As for tubeless, the wheels won't allow it.

Link to comment
Share on other sites

  • 1 year later...

I am in a similar position.

Any shops in CT region with 10" tube stock. Maybe stocking them in the last year

Link to comment
Share on other sites

Have you tried Caledonian cycles and Neil's Wheels? They had some stuff I looked everywhere for.

 

Sent from my SM-A510F using Tapatalk

Link to comment
Share on other sites

Would a wheel barrow tube maybe work ?

 

Available at all Agri outlets, and most hardware stores.

 

 

Or tubeless - as in the solid insert in the tire ??

Link to comment
Share on other sites

You can just use a 12" or 16" tube. Fold it inside itself to shorten it.

The same way you would shorten a 29" tube to use in a 27.5 or 26.

It's not as if it's running at high speed or pressure ;)

 

As said earlier, tubeless is most likely the best option though.

Link to comment
Share on other sites

I have fitted a 29 tube in A 24 wheel , if try hard enough anything is possible..

Ja, but you would................  :ph34r:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout