michaelbiker Posted March 3 Posted March 3 I am trying to revive an old set of XTR M9000 pedals and am missing a couple of bearings - don't ask they are tiny. Does anyone have an old pair of broken shimano pedals where I can salvage some internals to rebuild these? I am looking for pretty much anything - seals, bearings - maybe even a spindle if possible - but at a minimum I just need a few of those tiny bearings.
ChrisF Posted March 3 Posted March 3 5 hours ago, michaelbiker said: I am trying to revive an old set of XTR M9000 pedals and am missing a couple of bearings - don't ask they are tiny. Does anyone have an old pair of broken shimano pedals where I can salvage some internals to rebuild these? I am looking for pretty much anything - seals, bearings - maybe even a spindle if possible - but at a minimum I just need a few of those tiny bearings. Are you looking for the "loose balls" ? Most bearing shops sells packets of these in different sizes. As long as you have one of those, then they can measure and check if they can help you.
michaelbiker Posted March 3 Posted March 3 Just now, ChrisF said: Are you looking for the "loose balls" ? Most bearing shops sells packets of these in different sizes. As long as you have one of those, then they can measure and check if they can help you. Oh cool. Do you know of any bearing shops in CT area?
CycleGuy10000 Posted March 3 Posted March 3 Hi, everyone. Does anybody have a Csixx 36T chainring as seen in the picture that they don't use? I will gladly pay or swap for a 34T XX1 chainring.
ChrisF Posted March 3 Posted March 3 (edited) 34 minutes ago, michaelbiker said: Oh cool. Do you know of any bearing shops in CT area? I have been using West Cape Bearing in Brackenfell for last couple of years. Just google for "bearing man" in your area Most old school bike shops can also help. Edited March 3 by ChrisF Dexter-morgan and michaelbiker 1 1
Me rida my bicycle Posted March 3 Posted March 3 On 2/10/2025 at 7:39 PM, phenning said: any one have a dub extraction cap lying around . looks like the factory forgot to locktite myne and is lying somewhere in jonkershoek Would this work?
Me rida my bicycle Posted March 3 Posted March 3 4 hours ago, michaelbiker said: Oh cool. Do you know of any bearing shops in CT area? Bearing man is in Brackenfell but sure there should be more branches
MudLark Posted March 4 Posted March 4 https://bikehub.co.za/classifieds/item/computers-and-gps/798620/garmin-1030-edge-charging-port-covers
phenning Posted March 4 Posted March 4 @Me rida my bicycle probably, but already bought a replacement, thanks anyway Me rida my bicycle 1
Me rida my bicycle Posted March 4 Posted March 4 2 minutes ago, phenning said: @Me rida my bicycle probably, but already bought a replacement, thanks anyway It must be a common problem as I picked up this one 😂
Wez-O Posted March 7 Posted March 7 On 2/27/2025 at 8:35 PM, Zebra said: Curious; where will you be donating it to? Cheers Chris I haven’t thought that far yet. Probably an helper at our complex. Open to suggestions? Zebra 1
Scottdog Posted March 14 Posted March 14 New Specialized seatposts from the bike shop normally come out the box with the saddle rail clamps for both the "CARBON" (oval) rails and the "ALLOY" (for round rails) adapters/clamps for whichever seatpost rails are on the saddle. I have recently changed from a saddle with carbon rails to one with alloy rails, and I now need the round adapter for the round/alloy saddle rails. I really don't want to buy a new set from Specialized which both sets of adapters when all I need is the adapters for the Round/Alloy saddle rails. I'm hoping someone has a spare set of clamps for the Alloy rails lying around after fitting new clamps for their Carbon Rails.
JK Cycles | Daniel Rossouw Posted March 18 Posted March 18 Hi recently bought a set of Equinox Carbon rim brake, sent the rear wheel in for truing only to receive a wonky wheel with a crack in the hoop back. If anyone has a 40mm/50mm carbon hoop, 24H that they are no longer using please let me know. TIA
Barry Posted March 18 Posted March 18 42 minutes ago, JK Cycles | Daniel Rossouw said: Hi recently bought a set of Equinox Carbon rim brake, sent the rear wheel in for truing only to receive a wonky wheel with a crack in the hoop back. If anyone has a 40mm/50mm carbon hoop, 24H that they are no longer using please let me know. TIA Try Solomons Pretoria North. They had two or three random NOS Equinox wheels maybe they will work a good deal on the old stock. JK Cycles | Daniel Rossouw 1
RobynE Posted March 18 Posted March 18 Not something that will be thrown away but looking for: Cane Creek Thudbuster Preferably in 31.6 but can shim if necessary. Fine if it’s been cut as the bike has a very shallow seat tube Budget up to R1000 but ideally less 😂 for a mate who is a student
Dexter-morgan Posted March 18 Posted March 18 1 hour ago, RobynE said: Not something that will be thrown away but looking for: Cane Creek Thudbuster Preferably in 31.6 but can shim if necessary. Fine if it’s been cut as the bike has a very shallow seat tube Budget up to R1000 but ideally less 😂 for a mate who is a student Look on temu, they had something similar for a good price.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now