Navias007 Posted January 11, 2019 Posted January 11, 2019 Hi All, I have a friend who needs to have their wheels trued. Most cycling stores offer this service but he and I are a little sceptical of some of the stores. Simple tasks are not done properly for example.Without costing an absolute fortune, could any fellow hubbers offer some advise as to which store has a good reputation in this regard.
fanievb Posted January 11, 2019 Posted January 11, 2019 Summit Cycles corner of Whisken Ave and Walton Rd (opposite plantland midrand)
NicoR Posted January 11, 2019 Posted January 11, 2019 Sprocket and Jack for JHB North. If you feel like a drive, Hanfred at Midstream Cycles
Navias007 Posted January 11, 2019 Author Posted January 11, 2019 Summit Cycles corner of Whisken Ave and Walton Rd (opposite plantland midrand) thank you.
Navias007 Posted January 11, 2019 Author Posted January 11, 2019 Sprocket and Jack for JHB North. If you feel like a drive, Hanfred at Midstream Cycles Thank you
ChUkKy Posted January 11, 2019 Posted January 11, 2019 Nick the wheelbuilderHe is on the hub as wheelbuilder.Hes built some carbon wheels for me and some other mates too, use him!
the nerd Posted January 11, 2019 Posted January 11, 2019 well you pretty much have the top 3 builders i would trust in jhb...
RockCoach Posted February 13, 2019 Posted February 13, 2019 Tom at Giant Jhb - previously Mike's Bikes in Greenside.
nick_the_wheelbuilder Posted February 13, 2019 Posted February 13, 2019 Thanks for the recommendations guys. I'm happy to help. I'm in Paulshof.
Brandon P Posted February 13, 2019 Posted February 13, 2019 I'd go to 'Nick the Wheelbuilder'. Built a superb back wheel for my MTB and is very pleasant too.
Schnavel Posted February 13, 2019 Posted February 13, 2019 David Marshall Also a member on the hub - I won't take my wheels, road and mtb, anywhere else.
thebob Posted February 13, 2019 Posted February 13, 2019 Another vote for Nic. Top quality workmanship, very accommodating and just an good guy all round!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.