Cunning-Stunt Posted September 9, 2020 Posted September 9, 2020 (edited) Just check that the caliper and disk fit snug at the top at the disk. Like this pic. If not then i think its the wrong size spacer. I replaced one caliper on my bike with another Shimano caliper which i thought was the same and had the same issue. The difference in width was about 3 mm on the caliper itself which gave me the issue. Small margin for error with these guys... Good luck. Edited September 9, 2020 by Cunning-Stunt Meezo 1
madmarc Posted September 10, 2020 Posted September 10, 2020 You have the wrong size adapter mounted - Like /stoke says tell us which fork and rotor size and the problem will be easily solved
doddmo Posted September 11, 2020 Author Posted September 11, 2020 False alarm... Looks like the pads are aligned with the outer edge of the rotor. The wide contact surface of the the rotor through me. Thanks for the input guys. Meezo 1
TheoG Posted September 11, 2020 Posted September 11, 2020 (edited) True, that contact surface is wider than usual. Bad because the designer/manufacturer could have cut "very little" weight there, good because you will have larger surface area exposed for cooling. Edited September 11, 2020 by Theog
solty Posted September 11, 2020 Posted September 11, 2020 I saw something in your username and now I can't unsee it. Me rida my bicycle, Bomberman and PSYCHOsmurfZA 3
TheoG Posted September 11, 2020 Posted September 11, 2020 I saw something in your username and now I can't unsee it. Hugh? Sorry I don't get it ...
PSYCHOsmurfZA Posted September 11, 2020 Posted September 11, 2020 I saw something in your username and now I can't unsee it.HAHAHAHAHAHAHA well spotted it didn't make sense at first but once seen
GhostSixFour Posted September 11, 2020 Posted September 11, 2020 Hugh? Sorry I don't get it ... If you swop the first parts of the two words... It becomes stunning...
Bomberman Posted September 11, 2020 Posted September 11, 2020 (edited) I saw something in your username and now I can't unsee it. Edited September 11, 2020 by Bomberman
DR ◣◢ Posted September 11, 2020 Posted September 11, 2020 I saw something in your username and now I can't unsee it. Back in the day there was an MTB movie called "Dirty Tricks & Cunning Stunts" Being from the likes of Rob Warner you can only imaging that the same applied.
Chadvdw67 Posted September 12, 2020 Posted September 12, 2020 Metallica also did a Cunning Stunts tour And now I am not sure if Theog is supposed to be Theo g or The og DR ◣◢ and TheoG 2
TheoG Posted September 30, 2020 Posted September 30, 2020 Metallica also did a Cunning Stunts tour And now I am not sure if Theog is supposed to be Theo g or The og Its Theo G(rové) ... Chadvdw67 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now