Jump to content

Recommended Posts

Posted

Anyone got any advice on slicks for a 29er

 

I bought a set from Solomons, and when I got home I saw that they can only be pumped up to 3.5bar which doesn't seem sufficient to me for road biking. The XC tires I've got on the bike at the moment can be pumped to 5.5bar by way of comparison.

 

I called Solomons and they assured me that riding 100km (read 94.7) on slicks at 3.5bar vs higher pressure tires won't make any difference, but that doesn't seem right to me.

 

The guys at Solomons also said they don't have much in the way of choice for 29er slicks and that they are hard to come by which is I expect why they sold me these 3.5bar no-namers (that's what they had, not what was best)

 

Anyone got any thoughts, and more practically - anyone know of a bike shop that has some decent 29er slicks because I'm sure there must be better ones around than these no-namers I've got.

 

Any advice appreciated :)

  • Replies 36
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted

You don't mention the tyre sizing and rim width?

 

Theres a misconception that this is some new wheel size when in fact 29r equals 700c.

So you should be able to fit most road or hybrid tyres, look for a good tyre width depending on your rim's width.

Conti, Schwalbe, Bontager, and Michelin etc all make commuter/hybrid tyres that will fit.

Posted

When I was confused and did an Argus on a 29er, I just bought standard road tires at the Good hope Centre registration sell out, put them on, pumped as hard as my Raleigh floor pump could (8bars) and had an awesome ride. R 300 for both.

Posted

The XC tires I've got on the bike at the moment can be pumped to 5.5bar by way of comparison.

 

The tyres can handle 5.5 bar but what is the max rec pressure on the rims.

You could possibly get away with running 28mm road tyres depending on how wide the inside of your rim is.

I know a few guys that have built 32 hole 700c rims onto mtb hubs to train on the road with :thumbup:

Posted

Be a BAD ASS and go and ride the race with your Normal Nobbly MTB Tyres. The look on those roadie's faces as you pass them with ur big tyres will be pricless and definitely worth it... :ph34r:

 

Post your time on the 19th, your knobby time that is...

Posted

Not sure how much this helps, but by way of comparison I bought a set of Conti ComfortContacts slicks earlier in the year before buying a road bike as well.

 

They are actually 28x175 and can go to max 4bar. Saw me through the Dischem and Argus this year on my 29er.

 

If I recall correctly they were R200 each at Linden which included the tube.

Posted (edited)

Personally I think that 3.5bar is more than sufficient, especially when it comes to "MTB" tires. Harder tires don't necessarily mean lower rolling resistances!

Someone posted this link in another thread at some point, here's what the folks at Schwable have to say: http://schwalbe.com/...ik&tn_subPoint=

 

EDIT: Oh wait, I read it wrong for smooth surfaces; harder pressures are preferable. :oops:

Edited by Helpmytrap
Posted

Be a BAD ASS and go and ride the race with your Normal Nobbly MTB Tyres. The look on those roadie's faces as you pass them with ur big tyres will be pricless and definitely worth it... :ph34r:

 

Real mtb's never go on tar. Silly noob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout