Jump to content

Making a fender for your MTB


deanbean

Recommended Posts

It's starting to rain here and I'm tired of getting mud in my eye :whistling: , so I did a search for fenders and got a number of templates. I'll be using the first one and cutting it out of 4mm plastic from a 20l container that I used for another project (the advantages of being a farmer, all the left over material form old projects, and I'm a bit of a DIY freak)

 

post-2975-0-65171200-1382106188_thumb.jpg

 

post-2975-0-03672500-1382106189_thumb.jpg

 

post-2975-0-94289300-1382106278_thumb.jpg

This last one had me a bit mystified, so I reread the page it came from;

Simply printout the below so the measurements match.

place template onto an old inner tube and cut out.

you'll also need 4 zip ties to secure the mudguard onto your forks.

http://singletrackworld.com/forum/topic/my-free-gift-to-the-world-mudguard-template-100mm-forks

think I got it wrong :blush:

 

Post your attempts here, I will do the same

Link to comment
Share on other sites

  • Replies 99
  • Created
  • Last Reply

Template printed on A4 and adapted with more front coverage

post-2975-0-26298900-1382110205_thumb.jpg

Ready to cut with Jigsaw

post-2975-0-76889500-1382110221_thumb.jpg

Done

post-2975-0-33348800-1382110240_thumb.jpg

Heatgun to mould the shape of the fender

post-2975-0-82460700-1382110247_thumb.jpg

Holes marked

post-2975-0-71064800-1382110262_thumb.jpg

With the template

post-2975-0-54198200-1382110281_thumb.jpg

Cleaned and holes drilled,

post-2975-0-95547600-1382110295_thumb.jpg

Ready to mount

post-2975-0-75358700-1382110329_thumb.jpg

Mountedpost-2975-0-09867600-1382110330_thumb.jpg

View from the front to show clearance

post-2975-0-40617100-1382110330_thumb.jpg

Rear and front views

post-2975-0-78870400-1382110330_thumb.jpgpost-2975-0-17462600-1382110331_thumb.jpg

 

Time taken about 45min including getting tools, finding the plastic, and scrubbing the fender.

Link to comment
Share on other sites

Cut off those Zip-tie ends, before they lay eggs!!

 

Looks good! :thumbup: wish I wasn't so lazy

Gonna turn them into my spokes for that lekker prrrrrr sound

 

they're gone already, couldn't find the nail clippers.

Link to comment
Share on other sites

Nice job, that plastic looks very thick. Try go to a plastic world or plastic shop, they should have thin sheets of plastic, alternatively get those thin plastic chopping mats, thats what i made the first few out of.

Link to comment
Share on other sites

I like your way of doing things Bean :thumbup: , but since I'm a lazy city slicker (not really) I bought mine for R90 from Trail & Tar.

Link to comment
Share on other sites

Glad your rain came. Cable ties are the new polluter at camp sites. Even worse than beer bottle tops.

Link to comment
Share on other sites

Glad your rain came. Cable ties are the new polluter at camp sites. Even worse than beer bottle tops.

 

I buy brightly coloured ones when overlanding - they are so much easier to see and not leave behind by mistake - unlike the black ones.

Link to comment
Share on other sites

 

 

I buy brightly coloured ones when overlanding - they are so much easier to see and not leave behind by mistake - unlike the black ones.

 

I pick mine up and take them with me, with all those of the others that I habitually pick up. We also have kiep kiep parade before we pitch camp and it is also the last thing we do before we leave.

Link to comment
Share on other sites

I pick mine up and take them with me, with all those of the others that I habitually pick up. We also have kiep kiep parade before we pitch camp and it is also the last thing we do before we leave.

 

I like that - and I'm going to teach my kids to call it that in future, we've just never had a word for it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout