The Salvage Thread

[Muzzarati]

Crank brother Mallet pedals. The one pedal was stuck in the crank so had the shaft shaved a bit so a spanner could be used to remove it.

Edited April 14, 2017 by Muzzarati

[theRussian]

Thanks.

 

I'm sitting in Rhodes, so not going to be able to come and look....

 

If you have an XT 9spd rear shifter in fair condition, could you send me a pic of it please.

 

I'm happy to pay for it as I support what you guys are doing.

Sorry Johan, was a bit off-line and missing in action. Just checked. I do not have XT spares. All lower end stuff. Hope you managed.

[Henryfeather]

Hi guys I'm looking for a 29" mtb rear wheel QR ,cassette sizing unimportant as well a tyre unimportant want to fit trainer wheel on to do threshold work on stationery trainer

Regards.

I'm in joburg east

[theRussian]

Busy with a few builds for school kids that will be competing in the Spur Schools MTB series in Gauteng. I need 2 suspension forks (shocks). One for a 29" GT and another for a 26" Scott. Both older bikes so straight steerer, QR please. 

 

Also looking for some Crank Sets for these. The 2 Piece cranks with External BB cups will be perfect, but will take anything that will fit these frames. (BB30 will obviously not work ;-))

 

The rest I have. I have a complete garage full of spares and stuff. If you need something, come and have a look. Freely I receive, so freely I give! If you need anything that I have and I do not have a build for it immediately, then you can have it.

 

Check us out on facebook.com/bombcenturion.

 

Thanks! 

[BSG]

I'm looking for a 9speed mtb derailer for a friend of a friend please.

 

Sent from my D5803 using Tapatalk

[samson99]

I'm looking for a 9speed mtb derailer for a friend of a friend please.

 

Sent from my D5803 using Tapatalk

I have one. PM me.

[Kalahari Vegmot]

.

Edited July 4, 2017 by Kalahari Vegmot

[milky4130]

hi guys, i'm looking for an XT right hand brake lever? Thanks

[BaGearA]

Anyone in Pretoria/Joburg area got A 31.6 seatpost laying around ?

[milky4130]

hi guys, i'm looking for an XT right hand brake lever? Thanks

No longer required, just needed a good clean & new o-ring for the piston. Thanks for the link to that solution Meezo.

[Allrounder]

Anybody has a 54/56 road frame lying around? Cleaner at work got robbed, and I am putting something together. I have most of the bits and bobs. 

[Eugene Brown]

http://www.freemanscycles.co.uk/media/catalog/product/cache/1/image/500x500/9df78eab33525d08d6e5fb8d27136e95/s/r/sram_right_hand_-_5_speed.jpg

I'm looking for a gripshift that someone is willing to let go of.

Its for a DIY, cable actuated quad bike throttle. So it doesn't have to be in suberb

working condition. A standard mtb riserbar will be used for steering.

 

Would prefer a right hand one. But a left hand one is welcome too.

I have a 2 month old Shimano Tourney RHS grip shift, and the half-grip that goes with it. R100 for both LHS and RHS (it's off our gardener's bike, so he needs all the pennies he can get for his new-born baby in Lilongwe) Let me know

[Eugene Brown]

Busy with a few builds for school kids that will be competing in the Spur Schools MTB series in Gauteng. I need 2 suspension forks (shocks). One for a 29" GT and another for a 26" Scott. Both older bikes so straight steerer, QR please. 

 

Also looking for some Crank Sets for these. The 2 Piece cranks with External BB cups will be perfect, but will take anything that will fit these frames. (BB30 will obviously not work ;-))

 

The rest I have. I have a complete garage full of spares and stuff. If you need something, come and have a look. Freely I receive, so freely I give! If you need anything that I have and I do not have a build for it immediately, then you can have it.

 

Check us out on facebook.com/bombcenturion.

 

Thanks! 

Any clamp-on style front derailleurs for a 3x7 setup on my gardeners Makro-bike? The pressed steel china-style one keeps going out of alignment, and the pivot points are worn out already. Willing to pay for a Shimano one if you have. Please PM me

[Dexter-morgan]

Anyone in Pretoria/Joburg area got A 31.6 seatpost laying around ?

I think I have a Silverback one sonewhere. PM me.

[johannrissik]

Any clamp-on style front derailleurs for a 3x7 setup on my gardeners Makro-bike? The pressed steel china-style one keeps going out of alignment, and the pivot points are worn out already. Willing to pay for a Shimano one if you have. Please PM me

I have a Shimano 3x8 setup if you'd like it. Came off an old GT Palomar and was working fine. 

 

Would you like the whole lot, cranks, chainrings, chain, cassette, F&R derailleurs.....? It's better quality than the Makro bikes have.

Edited June 18, 2017 by johannrissik

[Kalahari Vegmot]

I have a Shimano 3x8 setup if you'd like it. Came off an old GT Palomar and was working fine. 

 

Would you like the whole lot, cranks, chainrings, chain, cassette, F&R derailleurs.....? It's better quality than the Makro bikes have.

BikeHub strikes again!