are my rims stuffed?

[Mongooser]

on both my bikes my tyres tear off the wheel in corners at 2.5 bars and 2.0 bars

ive tried a few different tires on the wheels and i keep knocking them off my wheels

any ideas why this keeps happening?

[Schnavel]

Photos of the rims?

[Tubehunter]

Photos of the rims?

 

With the tyre bead not seating on the inside of the rim wall, it's important that the photos are without tyres on and showing the inside rim cavity in a few areas. When you have inspected the rims is there anything you notice regarding this?

[ALLMTB]

Make and model of rims and tyres?

[Mongooser]

Make and model of rims and tyres?

dartmoore raiders,maxxis high rollers 2.5

alex supra DH with maxxis high roller 2.5,

rims dont have any dents

 

With the tyre bead not seating on the inside of the rim wall, it's important that the photos are without tyres on and showing the inside rim cavity in a few areas. When you have inspected the rims is there anything you notice regarding this?

haven't noticed anything that looks bent dented,would new rim tape maybe fix it?

[Wannabe]

Stab in the dark here (not so much of a tubeless fitting expert), but do you not perhaps have too much rim tape on, preventing the tires from seating in the beads properly?

 

Edit: Reason I'm asking, one of my first attempts I struggled to get the tires to seat properly. After countless attempts, I removed a few of the layers of tape I put on (reasoning being, more is mos better.  ) and it then seated no problem.

Since then I do not put down more than two layers of tape on.

[Edge_Design]

Stab in the dark here (not so much of a tubeless fitting expert), but do you not perhaps have too much rim tape on, preventing the tires from seating in the beads properly?

 

This is definitely a problem with certain rims - I've encountered it with ZTR rims before. Very possibly could be the problem.

[Pure Savage]

Photos of the rims?

Photos of the crashes

[BLACKvoodoo]

You're too Fat...

[Sepia]

Photos of the crashes

Excellent!!

[Pah Bear]

Stab in the dark here (not so much of a tubeless fitting expert), but do you not perhaps have too much rim tape on, preventing the tires from seating in the beads properly?

 

Edit: Reason I'm asking, one of my first attempts I struggled to get the tires to seat properly. After countless attempts, I removed a few of the layers of tape I put on (reasoning being, more is mos better.  ) and it then seated no problem.

Since then I do not put down more than two layers of tape on.

This could be a stab in the light. If you have too much tape  it could cause a seating problem.

[Mongooser]

Photos of the crashes

i accidentally ran the photographer over...

 

You're too Fat...

 

with roost

[arendoog]

Maybe a BMX on a downhill run is not a good idea Mongooser !

[popcorn_skollie]

Are we talking about just burping or tyres blowing off the rim completely?

Are your high rollers the older wire bead versions?

I have dartmoor raiders and tubeless is pretty easy.

Also why are you running pressures that high?

You don't weigh much and dropping your pressures will make a big difference in cornering

[Mongooser]

Are we talking about just burping or tyres blowing off the rim completely?

Are your high rollers the older wire bead versions?

I have dartmoor raiders and tubeless is pretty easy.

Also why are you running pressures that high?

You don't weigh much and dropping your pressures will make a big difference in cornering

i have to run my tyres that high because I huck stuff,overshoot road-gaps

and like to roost alot,not sure how old my maxxis tyres are not more than 2 years

one is 5 months old,maybe on my next bike ill try tubeless?

[porqui]

How wide/narrow are your rims.

What do you weigh.

 

2.5's on a narrow rim could be a problem at low pressure.