Iwan Kemp Posted September 25, 2019 Share I have the One Twenty 8000 with AXS XX1, AXS dropper and a Pike Ultimate fitted aftermarket. It comes in at just over 13kg so you'll bust to get your Alu bike down to 13kg without spending good money. Granted the bike comes with some proper chunky tires, changing those will drop some weight easy peasy. Agreed with above sentiments re wheels and tires to drop some weight. Rotational weight is also a bastard so always good to start there. Edited September 25, 2019 by Iwan Kemp GiantTjop and DieselnDust 2 Link to comment Share on other sites More sharing options...
Nicomrs Posted September 28, 2019 Share Ok, decided to go with stans rims with hope pro 4 hub, any thoughts? Still deciding between arch and flow rims. DJR 1 Link to comment Share on other sites More sharing options...
BaGearA Posted September 29, 2019 Share Ok, decided to go with stans rims with hope pro 4 hub, any thoughts? Still deciding between arch and flow rims.I'd go for the flow because they're much stronger but probably also heavier than the arches see if you can find a weight spec for your current wheels I'm dead sure the hope/stans combo will still save a fair few grams and you'll have bomb proof wheels Link to comment Share on other sites More sharing options...
DieselnDust Posted September 29, 2019 Share Ok, decided to go with stans rims with hope pro 4 hub, any thoughts? Still deciding between arch and flow rims.Will the wheels be used mostly for marathon with occasional trail or do you intend to #enduro?arch for the former and flow for the latter. Link to comment Share on other sites More sharing options...
Nicomrs Posted September 29, 2019 Share Mostly trails with occasional marathons Link to comment Share on other sites More sharing options...
Ozzie NL Posted September 29, 2019 Share not a lot you can do without spending major moola on new drive train, lighter fork or wheel set. However reasonable upgrades would be carbon handle bar and stem. Also, if the bike is sold standard with the maxxis forekaster 2.35 folding tires, I would replace those with lighter vittoria barzo 2.25 tires (that alone should save 360g). not sure which pedals you are using, but xtr clipless pedals will also save a few grams. then lastly look at importing some lightweight through axles. claimed standard weight as per some websites for this bike is 14.10kg, which is not bad for an aluminium dual suss with dropper post. I reckon if you can get down to low 13kg's build you have a winner.Sjoe, for 1.1kg weight saving I would invest in big box of laxatives matthieup 1 Link to comment Share on other sites More sharing options...
Patchelicious Posted September 29, 2019 Share Easiest way to drop weight on a Merida is to remove your Dennis. jdwet1980 and Wayne pudding Mol 2 Link to comment Share on other sites More sharing options...
Me rida my bicycle Posted September 29, 2019 Share I would say Lyne amp 30 or pulse 30 good solid wheels lighter that Stan's and definitely stronger. I had 2 sets of mrk3 Stan's wheels and both cracked around the nippels, from there went with Lyne amp 30 and they have been bulletproof! Hamstring 1 Link to comment Share on other sites More sharing options...
Hamstring Posted September 30, 2019 Share Ok, decided to go with stans rims with hope pro 4 hub, any thoughts? Still deciding between arch and flow rims.try looking at Lyne Components just got a set of wheels for 6k that was lighter than mt Crest and ark 24s, very happy so far. Link to comment Share on other sites More sharing options...
dave303e Posted September 30, 2019 Share also remember there are 3 types of weight Sprung, unsprung and rotating mass. Rotating mass is the worst weight, as you have to accelerate it into it's rotation to get it moving forward and you have to maintain that rotation. You also have the gyroscopic affect making it harder to turn etc. This is things like wheels, tyres, hubs etc. A small weight saving there will feel like a bigger weight saving. Unsprung mass is things like rear triangle and fork lower, this is the next worst weight. Your suspension has to work against this weight and break it's momentum in order to keep the tyre in contact with the ground best. Weight saved here will add some performance. Finally Sprung weight, this is all the rest, usually this is also the cheapest weight to lose on a mtb, but in reality it will not give you the gains that the other 2 types of weight will. svacha, DieselnDust, Patchelicious and 2 others 5 Link to comment Share on other sites More sharing options...
Nicomrs Posted October 29, 2019 Share Ok fitted some nice stanz flow rims with hope hubs, much better ride. Still weighing in at 14.9kg????whats next? Link to comment Share on other sites More sharing options...
AndrewMo Posted October 29, 2019 Share A drilling machine and an epic sense of adventure. Ok fitted some nice stanz flow rims with hope hubs, much better ride. Still weighing in at 14.9kgwhats next? svacha 1 Link to comment Share on other sites More sharing options...
BaGearA Posted November 5, 2019 Share Ok fitted some nice stanz flow rims with hope hubs, much better ride. Still weighing in at 14.9kgwhats next?1/2 a cup of sealemt per tyre not 2 gallons .....14.9 vok Link to comment Share on other sites More sharing options...
mtbride Posted November 5, 2019 Share My 120 800 Large stock was 14.2kg with pedals, dropped to 13.8kg with XC tyres. The biggest % of weight is frame, wheels, fork and tyres. Other than that the savings will be small and in the 100-200 grams per component if you're lucky ... Edited November 5, 2019 by mtbride Link to comment Share on other sites More sharing options...
Dexter-morgan Posted November 5, 2019 Share We have a Titan Skyrim comp and I removed the rear wheel and Boy it felt heavy and I am sure it is the 11-42 cassette, Cassette felt very heavy, I am sure it is steel, that bike is also very heavy, I am sure way more than 15kg Link to comment Share on other sites More sharing options...
mtbride Posted November 6, 2019 Share We have a Titan Skyrim comp and I removed the rear wheel and Boy it felt heavy and I am sure it is the 11-42 cassette, Cassette felt very heavy, I am sure it is steel, that bike is also very heavy, I am sure way more than 15kg The GX Eagle 10-50 is 450grams ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now