Hairy Posted October 11, 2021 Share 3 minutes ago, Alouette3 said: New additions to the bench. May I ask you what the torque wrench set you back please, and what range does it have? Link to comment Share on other sites More sharing options...
Alouette3 Posted October 11, 2021 Share 2 minutes ago, Hairy said: May I ask you what the torque wrench set you back please, and what range does it have? 5-25nm. Got it through Teng Tools locally online. Normal price R1153, got it on their Braai Day special for R1038. Comes with calibration certificate etc and quality is tops. Drop Simon a mail, great bunch, very helpful and often run specials. Knipex came with a friend from the UK TheoG and Hairy 2 Link to comment Share on other sites More sharing options...
BaGearA Posted October 11, 2021 Share 2 hours ago, Alouette3 said: New additions to the bench. Holy crap I'm jelly please post thoughts on the adjustable wrench in a couple of months, also eyeing a 180 or larger one Link to comment Share on other sites More sharing options...
Alouette3 Posted October 11, 2021 Share I'll give some feedback once I've used it a bit. Been wanting one for years. Know a couple helicopter engineers that have the whole range and it's all they have in the traveling tool case for spanners. Link to comment Share on other sites More sharing options...
dave303e Posted October 11, 2021 Share On 9/12/2021 at 4:52 PM, Hairy said: So who has a mill like this, or an anvil like this................ I used an angle grinder to make my anvil out of some railway line steel if that counts? Link to comment Share on other sites More sharing options...
Hairy Posted November 1, 2021 Share On 4/16/2021 at 8:32 AM, Hairy said: Got the little Bosch 27 piece set yester and tossed it into my bag on the way to a site meeting on the bicycle ... then got to use it on the way back to adjust the saddle angle that was just not right. Till you use a ratchet like this you do not realise how much easier it makes life on hard to reach areas. Just an update This little tool kit is a gem. Getting into tight spaces is easy peasy and I use it far more than I ever thought I would. Win win I say. ChrisF and BaGearA 1 1 Link to comment Share on other sites More sharing options...
ChrisF Posted November 1, 2021 Share 1 hour ago, Hairy said: Just an update This little tool kit is a gem. Getting into tight spaces is easy peasy and I use it far more than I ever thought I would. Win win I say. Add a 6 N.m torque wrench and this kit is probably thee most used part of my toolkit https://evobikes.co.za/product/birzman-torque-driver-5nm/ Get the 6 N.m one, not the 5N.m Alouette3, Hairy and Steven Knoetze (sk27) 3 Link to comment Share on other sites More sharing options...
Alouette3 Posted November 1, 2021 Share I bought the Ryder 6nm unit. They about R210 and super hand for those bar clamps and stems etc Hairy, ChrisF and Steven Knoetze (sk27) 3 Link to comment Share on other sites More sharing options...
Hairy Posted November 2, 2021 Share 13 hours ago, ChrisF said: Add a 6 N.m torque wrench and this kit is probably thee most used part of my toolkit https://evobikes.co.za/product/birzman-torque-driver-5nm/ Get the 6 N.m one, not the 5N.m I am starting to consider a big boy torque wrench for spinning spanners on the motorbike......I trust my wrist on the bicycle well enough thanks to many years of working on my bicycles, but the motorbike is a bit daunting for me and my wrist is also not calibrated to those torque numbers (Yet) Bloody things are expensive though, but I assume it is one of those things you only buy once in life. Vetplant 1 Link to comment Share on other sites More sharing options...
ChrisF Posted November 2, 2021 Share 24 minutes ago, Hairy said: I am starting to consider a big boy torque wrench for spinning spanners on the motorbike......I trust my wrist on the bicycle well enough thanks to many years of working on my bicycles, but the motorbike is a bit daunting for me and my wrist is also not calibrated to those torque numbers (Yet) Bloody things are expensive though, but I assume it is one of those things you only buy once in life. Sadly not that "easy" .... Motorcycles have a WIDE range of torque settings. So you need a "small" torque wrench for the sub-20N.m bolts, then the "medium" torque wrench for the next set of bolts. And when you get the higher end of torque values a "large" torque wrench is needed. Unfortunately the "range" of torque values of each is such that you end up with three torque wrenched to take you from 4N.m all the way to the 125+N.m range. Thankfully I got the big one working on cars, then bought the medium when working on motorcycles, so getting the small one for the MTB was just one more step down the rabbit hole. Hairy and Charles71 2 Link to comment Share on other sites More sharing options...
Hairy Posted November 2, 2021 Share 15 minutes ago, ChrisF said: Sadly not that "easy" .... Motorcycles have a WIDE range of torque settings. So you need a "small" torque wrench for the sub-20N.m bolts, then the "medium" torque wrench for the next set of bolts. And when you get the higher end of torque values a "large" torque wrench is needed. Unfortunately the "range" of torque values of each is such that you end up with three torque wrenched to take you from 4N.m all the way to the 125+N.m range. Thankfully I got the big one working on cars, then bought the medium when working on motorcycles, so getting the small one for the MTB was just one more step down the rabbit hole. I need something from 20-50N.m .... that should cover the basics of what I would want to do ............................................................................... I think ChrisF 1 Link to comment Share on other sites More sharing options...
Hairy Posted November 2, 2021 Share Are "great deals or finds" at the local Cash Converts worthwhile, or are you potentially just wasting your money? Link to comment Share on other sites More sharing options...
PhilipV Posted November 2, 2021 Share 3 minutes ago, Hairy said: Are "great deals or finds" at the local Cash Converts worthwhile, or are you potentially just wasting your money? It depends. I've bought a Stihl brush cutter there that I knew was undervalued, and in great condition. And a Carpenter mate of mine buys Bosch cordless tools there to send on site with his crews. He just replaces batteries as needed. And I'll buy well priced knives there. In fact I'm carrying a Leatherman right now that I got at a local cash converters. Hairy and Steven Knoetze (sk27) 2 Link to comment Share on other sites More sharing options...
ChrisF Posted November 2, 2021 Share 22 minutes ago, Hairy said: Are "great deals or finds" at the local Cash Converts worthwhile, or are you potentially just wasting your money? Just too many of our fellow Hubbers goods have ended up in Cash converters .... I dont want to feed that beast ... Hairy 1 Link to comment Share on other sites More sharing options...
ChrisF Posted November 2, 2021 Share 25 minutes ago, Hairy said: I need something from 20-50N.m .... that should cover the basics of what I would want to do ............................................................................... I think So the "medium" it is .... for now .... Actually a good start. As the projects are done, you will figure out if you have any need for the other two. Hairy 1 Link to comment Share on other sites More sharing options...
Alouette3 Posted November 2, 2021 Share Last torque wrench my dad checked out at Cash Converters was a decent Geodore unit, but when asking the sales person, they said it's great, it just doesn't read accurately.... as if they didn't know what the use of the wrench is for. Look out for Teng Tools, very good product and they often run specials. Comes with a calibration certificate. I bought a cheap AutoZone 20-210 torque wrench from CC for just over a hundred bucks, still need to do a calibration on it, but basically just use it at 40-50nm for cranks and cassettes. Steven Knoetze (sk27) and Hairy 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now