Jump to content

Gravel & Monster Cross Custom Bike Shootout!


Recommended Posts

On 12/15/2023 at 9:33 AM, TyronLab said:

Out of interest, what does this weigh in this configuration? Vintage bike conversions seem like a hoot.

Have not weigh it,but not light, this is probably Reynolds 025 tubing, heavy but strong, road it in November on a 2 day gravel ride of 173km, and performed without any hassles.

Link to comment
Share on other sites

  • 7 months later...
  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

On 12/15/2023 at 9:52 AM, NotSoBigBen said:

The rat/mullet bike all done and dusted, test ride this morning .... that fork has about 45mm of usable travel.  Enough to make for a comfortable ride on the general gravel routes I ride, not sure how much of that is the 'phat' tyres and how much the fork or a combination. Crap on tar though 

20231215_084121.jpg

That bike evolved into this over time

20240602_164927.jpg.b4ccc0cf308e85016db04a849db6ae20.jpg

The frame is too small for me and I've decided to do something different with it again .... 100mm full travel fork, its anyway now running 29" wheels

Paint and decals done, fork painted,  rebuilt with other stantions (those were badly worn)20240831_0915192.jpg.e5dc5c56f5b17242f35ab2f31db6d606.jpg

20240831_0914582.jpg.0f266b6aad3e69f3f5a936be169fe164.jpg

20240831_133216.jpg.01631ded3e28e61527a2feac90457c6a.jpg

Now just the build over some time in the next days

 

Link to comment
Share on other sites

Just have to sort a problem with the air shaft but that's for tomorrow 😎

P.S. no, @GrahamW says I have to sort out some cabling issues to neaten it up so there's that 😜

 

Thanks as always to my mate Thys the painter, @GrahamW from The Workshop in Alberhoughton and @Wyatt Earp for their invaluable advice and assistance!

20240902_163620~3.jpg

20240902_163655~3.jpg

20240902_163832~2.jpg

20240902_163748~3.jpg

Edited by NotSoBigBen
Link to comment
Share on other sites

4 hours ago, NotSoBigBen said:

Just have to sort a problem with the air shaft but that's for tomorrow 😎

P.S. no, @GrahamW says I have to sort out some cabling issues to neaten it up so there's that 😜

 

Thanks as always to my mate Thys the painter, @GrahamW from The Workshop in Alberhoughton and @Wyatt Earp for their invaluable advice and assistance!

20240902_163620~3.jpg

20240902_163655~3.jpg

20240902_163832~2.jpg

20240902_163748~3.jpg

Beautiful!! Trust Thys is the first name om the Christmas card list. 
 

Many happy miles! 

Link to comment
Share on other sites

Looking at this thread, I am inspired enough to go ahead with my drop bar conversion on my Straight bar gravel.

 

Link to comment
Share on other sites

  • 1 month later...
On 9/4/2024 at 6:55 AM, Dexter-morgan said:

Looking at this thread, I am inspired enough to go ahead with my drop bar conversion on my Straight bar gravel.

 

Just do it mate, a gravel bike deserves drops!

Link to comment
Share on other sites

7 minutes ago, NotSoBigBen said:

Just do it mate, a gravel bike deserves drops!

Connected the Rear brake last night, it should be finished by Friday for the coffee ride, will post Before and after pics once it is complete.

Link to comment
Share on other sites

7 minutes ago, Dexter-morgan said:

Connected the Rear brake last night, it should be finished by Friday for the coffee ride, will post Before and after pics once it is complete.

Excellent, looking forward to the pics!

Link to comment
Share on other sites

6 hours ago, NotSoBigBen said:

Just do it mate, a gravel bike deserves drops!

Also planning on doing this given the recent trend towards wider and wider tyres.

 

Struggling to find sram shifters though for some reason.

Link to comment
Share on other sites

13 hours ago, guidodg said:

IMG_1122.jpeg

IMG_1125.jpeg

IMG_1129.jpeg

If you can find a handelbar/stem that fits that slot perfectly, it’d finish the bike off superbly.

Link to comment
Share on other sites

12 minutes ago, Bub Marley said:

If you can find a handelbar/stem that fits that slot perfectly, it’d finish the bike off superbly.

I don’t think Mondraker make one short enough 🤔

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout