ichnusa Posted May 19, 2020 Posted May 19, 2020 (edited) I just tried the Lyne micro spline freewheel on a Stan's hub and it works perfectly! Edited May 19, 2020 by ichnusa MORNE , mountainfun, Hairy and 4 others 7
bullet77 Posted May 20, 2020 Posted May 20, 2020 That's good to know, Shimano 12spd is an option for me now.
LazyTrailRider Posted May 20, 2020 Posted May 20, 2020 I love Lyne products. Got a shorter stem for my Diverge from them on Monday, and have been running an AMP35 combo on my Stumpy since October, their bang for buck is hard to beat!
TCTG Posted May 20, 2020 Posted May 20, 2020 I just tried the Lyne micro spline freewheel on a Stan's hub and it works perfectly! rps20200519_221833.jpgSorry for the dumb question...whats the reason for this change in spline?
MORNE Posted May 20, 2020 Posted May 20, 2020 (edited) Sorry for the dumb question...whats the reason for this change in spline?new shimano freebody standard for 12 speed - amongst other things...it needed to change to fit a 10s cog on the new 12 speed cassettes. Edited May 20, 2020 by morneS555 TCTG 1
BaGearA Posted May 20, 2020 Posted May 20, 2020 Is the tooth count on the inner ratchet ring of the Lyne and Stan's hub the same? Just wondering cause if they aren't but the prawls still engage then you might risk stripping out the inner ring
Hairy Posted May 20, 2020 Posted May 20, 2020 new shimano freebody standard for 12 speed - amongst other things...it needed to change to fit a 10s cog on the new 12 speed cassettes.I understand with the microspline there is also less risk of the cassette digging into an alum free hub body. MORNE 1
BaGearA Posted May 20, 2020 Posted May 20, 2020 I understand with the microspline there is also less risk of the cassette digging into an alum free hub body.I think it's cause there are more splines, ie. Much more surface area to spread the load Jus spit balin Hairy and MORNE 2
ichnusa Posted May 20, 2020 Author Posted May 20, 2020 Is the tooth count on the inner ratchet ring of the Lyne and Stan's hub the same? Just wondering cause if they aren't but the prawls still engage then you might risk stripping out the inner ring Good point, I will check tonight
BaGearA Posted May 20, 2020 Posted May 20, 2020 rps20200520_163545.jpg Exactly the same...Well not really, bearing spacing.. What's the tooth counts on the ratchets ? That's the more interesting part to me Hairy 1
ichnusa Posted May 20, 2020 Author Posted May 20, 2020 I only have the Lyne freewheel body, not the hub. So obviously using same Stan's hub with same rachet... The Lyne freewheel body comes with the spacers needed to make the swop
Noshow Posted May 20, 2020 Posted May 20, 2020 I presume the Lyne XD freehub will also work on Stans? I think both hubs are 30-point, 12 degrees engagement, This a good option if so.
Matchstix Posted May 20, 2020 Posted May 20, 2020 rps20200520_163545.jpg Exactly the same... which one is the stans?
Matchstix Posted May 20, 2020 Posted May 20, 2020 Is the tooth count on the inner ratchet ring of the Lyne and Stan's hub the same? Just wondering cause if they aren't but the prawls still engage then you might risk stripping out the inner ring number teeth wont matter, as long is the ratchet engagement surfaces match Hairy and DieselnDust 2
Me rida my bicycle Posted May 20, 2020 Posted May 20, 2020 (edited) Should be the same thing as Lyne copied/used the outgoing stan's hub the Stan's Neo hub's should be different.Yip had a quick look the Neo hub's are different but most before even back to the dirty flea had the same freebody. Edited May 20, 2020 by Me rida my bicycle Jackie Thamsanqa Maholwana 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now