Jump to content

Boast about your latest purchases here...


camerons

Recommended Posts

Have you tried putting a 5mm odd spacer under the bottom bolt? tilts the nose of the bottle down and you might be lucky to have better fitment after that.

 

Used to do it on my Scott and got just enough clearance...

Have not tried that. Under the bottom bolt meaning the bolt sticks up a little and pushe don the bottlom of the water bottle?

Link to comment
Share on other sites

  • Replies 16.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Have not tried that. Under the bottom bolt meaning the bolt sticks up a little and pushe don the bottlom of the water bottle?

No - between the cage and the insert,so that the bottom of the cage is lifted off the frame a bit more. Try 1 then 2 then 3 washers

 

and only on the lower bolt so that the top of the bottle cants down towards the frame rather than running parallel to it.

Edited by El Capitan
Link to comment
Share on other sites

No - between the cage and the insert,so that the bottom of the cage is lifted off the frame a bit more. Try 1 then 2 then 3 washers

 

and only on the lower bolt so that the top of the bottle cants down towards the frame rather than running parallel to it.

 

If all else fails buy a Giant...........

Link to comment
Share on other sites

Have you tried putting a 5mm odd spacer under the bottom bolt? tilts the nose of the bottle down and you might be lucky to have better fitment after that.

 

Used to do it on my Scott and got just enough clearance...

 

 

Have not tried that. Under the bottom bolt meaning the bolt sticks up a little and pushe don the bottlom of the water bottle?

 

 

No - between the cage and the insert,so that the bottom of the cage is lifted off the frame a bit more. Try 1 then 2 then 3 washers

 

and only on the lower bolt so that the top of the bottle cants down towards the frame rather than running parallel to it.

Or buy a side loader from me for R195. Perfect for tight spaces.

Link to comment
Share on other sites

No - between the cage and the insert,so that the bottom of the cage is lifted off the frame a bit more. Try 1 then 2 then 3 washers

 

and only on the lower bolt so that the top of the bottle cants down towards the frame rather than running parallel to it.

Right, i get it now. Thanks for tip. Will try it.

Link to comment
Share on other sites

Or buy a side loader from me for R195. Perfect for tight spaces.

The cage i haveis already a side loder but if all else fails i will keep you in mind...thanks.

Link to comment
Share on other sites

Or buy a side loader from me for R195. Perfect for tight spaces.

 

Pic please Rob.

Link to comment
Share on other sites

No - between the cage and the insert,so that the bottom of the cage is lifted off the frame a bit more. Try 1 then 2 then 3 washers

 

and only on the lower bolt so that the top of the bottle cants down towards the frame rather than running parallel to it.

Just so - the nice light plastic nuts that come with some bottle cages to hold them on the packaging work very well - might want to drill them out a fraction.

Link to comment
Share on other sites

Pic please Rob.

 

http://cdn2.bigcommerce.com/server1100/j3yxlj/product_images/attribute_rule_images/64_zoom.jpg

Link to comment
Share on other sites

http://cdn2.bigcommerce.com/server1100/j3yxlj/product_images/attribute_rule_images/64_zoom.jpg

You sure this will work for MTB?  Ive lost many a bottle with a similar system

Link to comment
Share on other sites

You sure this will work for MTB?  Ive lost many a bottle with a similar system

 

The only time a bottle will out of this is when you crash. Movement on your MTB is almost all up and down, not sideways, so the force of the bottle is up into the over arm that keeps the bottle in place. I haven't had one user tell me they've lost a bottle on the sideloader, despite the promise of a replacement camelbak bottle if they did. This offer was futile as all I did was overstock on bottles that were never needed.....

Link to comment
Share on other sites

The only time a bottle will out of this is when you crash. Movement on your MTB is almost all up and down, not sideways, so the force of the bottle is up into the over arm that keeps the bottle in place. I haven't had one user tell me they've lost a bottle on the sideloader, despite the promise of a replacement camelbak bottle if they did. This offer was futile as all I did was overstock on bottles that were never needed.....

 

Combo special coming?

Link to comment
Share on other sites

My Silverback Vida 1 came with Shimano M520s and I don't have the appropriate shoes for them. I quickly swapped them out for a cheapie pair of flats from LBS, but my AEST flats have FINALLY arrived from China. R400 on ebay, magnesium body and titanium axle - 78g each. The 530s and the cheapies were both 190g per pedal.

 

They're a small purchase but the weight weenie I hide inside is dancing, and the otherwise black & white bike looks just a bit sexier. :)

 

http://www.ebay.com/itm/AEST-Bike-MTB-Magnesium-Pedals-Platform-CNC-Titanium-Axle-9-16-160g-pair-/251681069683

post-66369-0-08050400-1428421529_thumb.jpg

Edited by iamgigglz
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout