A challenge to the technical chaps ....

[BogusOne]

Drawing to follow haha

 

cut a piece of the aero at the back away and file the top piece where the post go in round so it can take a normal clamp. Just a quick drawing but dunno if it will make sence. Top view and side view. maybe a *** idea but easiest and cheapest for sure.

 

[NotSoBigBen]

cut a piece of the aero at the back away and file the top piece where the post go in round so it can take a normal clamp. Just a quick drawing but dunno if it will make sence. Top view and side view. maybe a *** idea but easiest and cheapest for sure.

 

 

That was exactly what I was trying to explain originally and seemed to be the easiest way? Pictures make it so much clearer, thanks man!

[Captain Fastbastard Mayhem]

Okay, please forgive the roughness of the drawing. Drawing on the ipad, where accurate gestures are replaced by vague lines in the middle of nowhere.

 

Aka - chunky finger syndrome

[BogusOne]

 

 

That was exactly what I was trying to explain originally and seemed to be the easiest way? Pictures make it so much clearer, thanks man!

 

Awesome. Glad I could help haha. The original "mast" looks almost like a Trek Madone seatmast but doubt that would fit.

[Captain Fastbastard Mayhem]

 

 

cut a piece of the aero at the back away and file the top piece where the post go in round so it can take a normal clamp. Just a quick drawing but dunno if it will make sence. Top view and side view. maybe a *** idea but easiest and cheapest for sure.

 

 

Much better, neater and cheaper than my idea. Nice, bogus!

 

Also looks like there's enough material at the top of the tube to make that work

Edited May 12, 2014 by cpt armpies mayhem

[janneman72]

Mtb style, normal seatpost with a "fris" cable tie at the top and bottom....

[NotSoBigBen]

Okay, please forgive the roughness of the drawing. Drawing on the ipad, where accurate gestures are replaced by vague lines in the middle of nowhere.

 

Aka - chunky finger syndrome

 

I will go drink some coffee at my carbon fibre mates tomorrow morning with this drawing as well! Thanks man

[NotSoBigBen]

Mtb style, normal seatpost with a "fris" cable tie at the top and bottom....

 

I doubt they make cable ties 'fris' enough for my not insignificant weight mate

[NotSoBigBen]

Will go buy a seatclamp before visiting, may get them to do the cutting and filing

[droo]

http://static.fjcdn.com/pictures/duct+tape.+tags+say+all_5368a3_3941242.jpg

[Fire Engine]

It might be a good idea to drill a 5mm or so hole at the bottom of the slot you cut for the clamp so it doesn't turn or run into a crack.

[Guest Smimby]

 

 

It is, eh!?

 

And wtf is up with that stem length on the ferrari bike?!

Not much wrong with the stem, but the steerer tube looks way loooong

[Guest Smimby]

Contact the manufacturers?

[Captain Fastbastard Mayhem]

Not much wrong with the stem, but the steerer tube looks way loooong

 

Yeah you're right... of all people to have a term fail. Meh

[NotSoBigBen]

Contact the manufacturers?

 

They're in China and since it's just for 'mucking' around with and I have very little money in it I don'[t m ind 'making a plan' ........ it's more fun this way no?

[scotty]

there is one of those at CycleLab Fourways .....

Which has Sora equipped components