Post your woodwork here

[Beesrib]

First coat...my wife said she wouldnt pay more than R1000 for the table [emoji57]

very nice work !

[Beesrib]

not close to what some of you are doing, but busy with this out of recycled pallet wood

 

 

 

[Rob Mortimer]

Sorry for the hijack

 

Anyone interested in this https://www.bikehub.co.za/classifieds/199146-balau-decking/

 

I no nothing about wood so have no idea if it is useable?

 

Hijack off - apologies

[mrbaker]

Ok- so I have 5 boards.

2m x 360mm x 40mm

 

Im open to a 'Fair' offer

[mrbaker]

Ok- so I have 5 boards.

2m x 360mm x 40mm

 

I'm open to a 'Fair' offer

[Captain Fastbastard Mayhem]

Joh, those look lekker!

[mrbaker]

Ok- so I have 5 boards.

2m x 360mm x 40mm

 

I'm open to a 'Fair' offer

What would the Hub woodworkers say is a fair price for a hubber? 

[Kranswurm]

What would the Hub woodworkers say is a fair price for a hubber? 

No idea but that wood would be much better utilized in the manufacture of guitars.

This guy might be interested.He used to be in Scarborough but has now moved

 

http://maingardguitars.com/

Edited July 11, 2016 by Kranswurm

[Pants Boy]

What would the Hub woodworkers say is a fair price for a hubber? 

 

Hmm that looks more like Rhodesian Teak than Rosewood though ... no matter, they cost the same from lumber yards.

 

Let's see, 10m long X 360mm wide X 40mm thick, would be .. uhm ... maths ... uhm 0.144 cubic metres, so roughly R2500 (From Silverton Timber Merchants latest list)

 

I'd say a fair offer would be somewhere around R2000, judging by the checks and chips (from planing too much at a time, presumably)

 

I'm out though, I'd rather look at something longer. Will send your pics through to some mates to contact you though.

[mrbaker]

Hmm that looks more like Rhodesian Teak than Rosewood though ... no matter, they cost the same from lumber yards.

 

Let's see, 10m long X 360mm wide X 40mm thick, would be .. uhm ... maths ... uhm 0.144 cubic metres, so roughly R2500 (From Silverton Timber Merchants latest list)

 

I'd say a fair offer would be somewhere around R2000, judging by the checks and chips (from planing too much at a time, presumably)

 

I'm out though, I'd rather look at something longer. Will send your pics through to some mates to contact you though.

Thanks Pants Boy!

I got them through my brother-in-law and he said they were Rosewood.

My wife actually asked me yesterday about the Teak planks and I was dumb enough to correct her  - Let's hope she doesn't see your post!!!!  

 

Ok - So the Hub price is R1750.00...

[Werner van Aardt]

Thanks Pants Boy!

I got them through my brother-in-law and he said they were Rosewood.

My wife actually asked me yesterday about the Teak planks and I was dumb enough to correct her - Let's hope she doesn't see your post!!!!

 

Ok - So the Hub price is R1750.00...

Where are you based?

[Plentipotential]

Hmm that looks more like Rhodesian Teak than Rosewood though ... no matter, they cost the same from lumber yards.

 

 

 Yeah looks like R/Teak. Not seen rose with pale sapwood pieces before.

 

Nice wide boards. Are you sure they are 360 mm wide?

Edited July 11, 2016 by Plentipotential

[Plentipotential]

not close to what some of you are doing, but busy with this out of recycled pallet wood

 

dresser.jpg

 

I like this, rustic look and re purpose of wood most people burn to keep warm.

[mrbaker]

Where are you based?

Linden JHB

[mrbaker]

 Yeah looks like R/Teak. Not seen rose with pale sapwood pieces before.

 

Nice wide boards. Are you sure they are 360 mm wide?

yip - measured them with a tape measure yesterday.

[Beesrib]

stained and in use.  Happy wife, happy life